Sub-Master Ring Sub-Assemblies Links

Quick Ref: CN-1449
Sub-Master Ring Sub-Assemblies Links

Multiple Chain width, Alloy Steel, Widely Available Gunnebo Grade 8 Master Link "MT Series" for 6mm to 32mm Lifting Chain, Multiple Chain width, Alloy Steel, Widely Available
GrabiQ Series, Alloy Steel, Designed for use with Chain or Wire Rope, 3 or 4 Leg Slings wide availability
  • GrabiQ Series
  • Designed for use with Chain or Wire Rope
  • For 3 / 4 Leg Slings
  • Wide Availability
Grade 'T' (8 / 80) sub assemblies for use with three or four leg chain slings. Grade 8 sub-assemblies are available for the following chain size - 7mm, 8mm, 10mm, 13mm, 16mm, 20mm, 22mm, 26mm, 32mm.
Oversized sub assemblies for use with three or four leg chain slings.

Oversized sub-assemblies are available for the following chain sizes - 7mm, 8mm, 10mm.

 

Sub assemblies for 3 and 4 leg chain slings.

Grade 10 sub-assemblies are available in the following chain diameters - 6mm, 7mm, 8mm, 10mm, 13mm, 16mm, 20mm, 22mm, 26mm

Quad Assemblies certified to DNV 2.7-1, type approval number S-5678.

Quad assemblies are available in the following sizes - 4100kg, 5800kg, 8830kg, 11,800kg, 14,500kg, 17,100kg, 23,000kg, 28,100kg, 38,300kg, 45,000kg, 65,000kg, 85,000kg, 150,000kg.

Crosby A347 Welded Master Link Assembly.

The Crosby A347 Welded Master Link Assembly is made from alloy steel - quenched and tempered. Individually Proof load Tested. The A347 is otherwise referred to as a Quad assembly and is used in the construction of lifting chain slings. Each link has a Product Identification Code (PIC) for material traceability, along with the size and the name Crosby® or "CG". Large inside width and length to allow additional room for sling hardware and crane hook. Engineered Flat for use with S-1325A coupler link

Crosby A-1346 welded master link assemblies.

Crosby A-1343 products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. Available in sizes A13 through A45. Alloy steel - quenched and tempered. Design factor of 4 to 1. Individually proof tested. Each link has a product identification code (PIC) for material traceability, along with the size and "CG" stamped into it.

Crosby Cold-Tuff Master Link Assembly.

The Crosby A342CT Cold-Tuff Master Link Assembly is also known as a quad assembly (effectively a master rings with 2x sub masters) made from alloy steel and are quenched and tempered with all A345CT's supplied individually proof tested at 2 times the WLL, CE certified.   Finish is inorganic zinc primer. COLD TUFF master links are suitable for use at - 50 F.

Stainless Steel masterlink sub-assembly for 3 and 4 leg chain slings.

Gunnebo Grade 50 "NATF Series" Stainless Steel Master Link Assembly Range 1,600kg to 10,000kg, Stainless Steel, Wide Availability

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Top