LIFTINGSAFETY

RUD LBS-RS Stainless Steel Load Ring, Lashing Point / Lifting Eye - Range from 500kg to 2000kg

Stainless Steel Weld-On Load Ring.

Model: 

LBS-RS / SSWOLR-2841


Please note that the RUD LBS-RS range of stainless steel load rings are not currently available, pending a redesign.

A stainless steel load ring for welding made of the material 1.4571 (stainless steel). In it's welded condition this is resistant against intercristalline corrosion, when being used in permanent operation, up to 400°C.

The chemical resistance and resistance against pitting by chloride media has been increased due to the Mo contents, and for this reason, the material 1.4571 is widely used in the chemical industry, petroleum, coal-tar chemistry and textile industries.

When fitting, use the Castolin ARC A Mo90009N welding electrode, or consult the manufacturer for the appropriate solution with respect to your work place.

See buy/quote tab above for technical specifications

Proof Testing

There is no requirement to Proof Test RUD Products, either Bolt or Weldable after Installation if the user instructions for welding are carried out correctly. The welding should be carried out by a suitably qualified and competent welder/person.

The supporting structure, or the load, should be of adequate strength to take the stresses involved and this is the responsibility of the engineering designer or equivalent.

RUD Lifting and Lashing Products are Manufactured and conform to EN 1677. No further Proof Testing in the field is required. In fact it would be considered that the Product had been overloaded if a Load more than the recommended Working Load Limit had been applied.

RUD products should be regularly inspected in line with the requirements of LOLER and as per our user instructions at intervals decided by a competent person.

Unfortunately this product has been discontinued and/or is no longer available. Please contact us for details on possible alternative products.

Please note that the RUD LBS-RS range of stainless steel load rings are not currently available, pending a redesign.

A stainless steel load ring for welding made of the material 1.4571 (stainless steel). In it's welded condition this is resistant against intercristalline corrosion, when being used in permanent operation, up to 400°C.

The chemical resistance and resistance against pitting by chloride media has been increased due to the Mo contents, and for this reason, the material 1.4571 is widely used in the chemical industry, petroleum, coal-tar chemistry and textile industries.

When fitting, use the Castolin ARC A Mo90009N welding electrode, or consult the manufacturer for the appropriate solution with respect to your work place.

See buy/quote tab above for technical specifications

Proof Testing

There is no requirement to Proof Test RUD Products, either Bolt or Weldable after Installation if the user instructions for welding are carried out correctly. The welding should be carried out by a suitably qualified and competent welder/person.

The supporting structure, or the load, should be of adequate strength to take the stresses involved and this is the responsibility of the engineering designer or equivalent.

RUD Lifting and Lashing Products are Manufactured and conform to EN 1677. No further Proof Testing in the field is required. In fact it would be considered that the Product had been overloaded if a Load more than the recommended Working Load Limit had been applied.

RUD products should be regularly inspected in line with the requirements of LOLER and as per our user instructions at intervals decided by a competent person.

Unfortunately this product has been discontinued and/or is no longer available. Please contact us for details on possible alternative products.

Contact Us About This Product

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Top