Miller "T-BAK" Tie back Inertia Reel. Options for Single or Twin Personal Fall Limiter (PFL) with Polyester Webbing Lanyard - 2.0 Metre
Model:
Miller T-BAK / MTPFL-3553
Miller Turbo T-BAK PFL - Tie-back safely with a retractable "self retracting lifeline" (SRL) The Miller Turbo T-BAK is a Tie-Back Personal Fall Limiter. Complies to EN360
Key Features
- Cost-effective alternative to tie-back shock-absorbing lanyards.
- All-in-one, self-retracting lifeline/anchorage connector design reduces equipment required on the job site.
- Designed for anchoring below a user's harness back D-ring for greater safety.
- Integrated shock absorber especially designed for tie-back applications with load indicator device.
- Meets all applicable OSHA, ANSI, CSA and CE standards, including the ANSI Z359.1 requirement that states only 24-inches (.62m) or less of lifeline extends out of the housing when the unit is fully retracted.
- The new patent-pending Miller Twin TurboTM D-Ring Connector easily adapts two Miller Turbo T-BAK PFLs for continuous 100% tie-off fall protection.
Recommended Industries/Use
- Construction
- Manufacturing
- Oil and Gas
- Utilities
- Other
Hazards
- Fall from height
Regulations
- Meets applicable OSHA, ANSI, CSA and CE standards, including ANSI Z359.1
Specifications
- Housing: High-impact nylon
- Hub: Shock-absorbing engineered co-polymer
- Braking Mechanism: Stainless steel
- Webbing: 1-in. wide x .075-in. thick (25.4 mm x 1.9 mm)
- Snap Hook: Zinc-plated steel Miller 5K® snap hook, 5,000-lb. (22 kN) gate strength, 3/4-in. (19 mm) gate opening
- Maximum Working Load: 400 lbs. (181.4 kg)
- Working Capacity: 7.5 ft. (2.3 m)
- Maximum Arresting Force:
<900 lb./f (4 kN) for up to 310 lbs. (140.6 kg) working load - Single
<1800 lb./f (8 kN) for up to 400 lbs. (181.4 kg) working load - Twin
| Part N° | Description | Weight |
| Miller Turbo T-BAK Tie-Back Personal Fall Limiter | ||
| MFLT-1/7.5FT | Turbo T-BAK without unit connector | 2.6 lbs. (1.18 kg) |
| MFLT-2/7.5FT | Turbo T-BAK with a 17D-1 steel twist-lock carabiner | 3.2 lbs. (1.45 kg) |
| MFLT-3/7.5FT | Turbo T-BAK with a 17D-2 lightweight, aluminum twist-lock carabiner | 2.8 lbs. (1.27 kg) |
| MFLT-4/7.5FT | Turbo T-BAK with a locking snap hook with 3/4-in. (19 mm) gate opening | 3.2 lbs. (1.45 kg) |
| MFLT-5/7.5FT | Turbo T-BAK with an ANSI Z359-compliant snap hook with 3/4-in. (19 mm) gate opening | 3.3 lbs. (1.50 kg) |
| Miller Twin Turbo T-BAK D-Ring Connector System |
||
| MFLTB-1/7.5FT | Twin Turbo D-ring Connector with two (2) MFLT-1/7.5FT Turbo T-BAK units | 6.1 lbs. (2.77 kg) |
Connector Choices
 |
 |
 |
 |
 |
| Without Connector |
Steel Twist-Lock Karabiner - 1" (25.4mm) Gate Opening |
Aluminium Twist-Lock Karabiner - 1" (25.4mm) Gate Opening |
Locking Snap Hook - 3/4" (19.1mm) Gate Opening |
ANSI Z359 Locking Snap Hook - 3/4" (19.1mm) Gate Opening |
Features Diagram
Dimensional Specifications
T-BAK User Instructions
(approx. 1.7Mb) Complete T-BAK Brochure
(approx. 0.7Mb) 
