LIFTINGSAFETY

Miller MA08 Duraflex 2 Point, Fall Arrest Harness with 1 x rear 'D' Ring and 2 x Front chest 'D' Rings

Miller Duraflex Elasticated 2 Point Fall Protection Harness conforms to EN361 with Front & Rear D Rings.

Model: 

Miller MA08 / H2CD-2057


This harness has now been superseded by a new H-Design MA08 Harness.

Miller MA08 Two-Point Duraflex Fall Restraint Harness

Rear and Front D Rings, with Teflon Finish

Harness user instructions 

Feel The Difference!

A High Quality general purpose Full Body safety Harness Allowing full freedom of movement, DuraFlex is one of the most comfortable height safety harnesses on the market for maintenance work, where the worker is required to crouch down and move around a worksite. This enhanced comfort guarantees optimum productivity. The webbing is treated with TEFLON to repel the oil, dirt and water which may cause the harness to erode.

  • Duraflex Webbing is Designed to Stretch and Conform to the Workers Body
  • All Miller harnesses are CE Certified and comply with EN 1361 and, where necessary, with EN 358
  • Sizes available: S (1002854), M/L (1002853), XL (1004959)

Patented Miller DuraFlex harnesses feature specially-formulated elastomer webbing that stretches to provide:

Greater Comfort

All Miller DuraFlex fall restraint harnesses conform to the shape of the worker, stretching with every movement, so there is no bunching, binding or kinking, as is the case with some other harnesses, which may cause discomfort to the user.

Improved Safety

With unsurpassed comfort, DuraFlex fall protection harnesses offer wider end-user acceptance.
More importantly, a comfortable harness is more likely to be worn properly, enhancing compliance and safety on the jobsite.

Increased Productivity

Because DuraFlex harnesses are elasticated, the worker has greater mobility with less fatigue. Also the bright, lime-green colour is readily visible which makes it easy to see whether the harness is being worn.

Increased Durability

TEFLON contributes to extend the service life of the DuraFlex harness as compared to conventional harnesses, for example...

  • An invisible high-tech protective treatment applied professionally to all DuraFlex and Manyard webbing.
  • TEFLON repels water, oil, grease, dirt and concrete dust that may cause the degradation and erosion of the harness and Manyard webbing.
  • Maintains durability and stain resistance even after repeated washing
  • TEFLON does not change the webbing's look, feel or breathability.

Technical Specifications:

Dorsal D-Ring

  • Raw Material : Stainless steel
  • Dimensions : 48 mm Ø7mm
  • Breaking Strength : > 5000 daN

Front D rings

  • Raw Material : Stainless steel
  • Breaking Strength : > 5000 daN

Performance

  • Breaking Strength : > 15 KN
  • Operating Temperature: -30°C to +50°C

General Information

  • Weight (kg) : approx. 1.1 kg

Certification and Conformity

  • EC Category PPE: Class 3
  • Standards: EN361
  • European Directives: 89/686/EEC
  • Quality Assurance: ISO 9001 / 2000
  • EC Certification Number: 333
  • EC Attestation Number: 0082/490/160/08/00/0257
  • Laboratory: APAVE Lyonnaise

Manufactured by Sperian (Formerly Bacou-Dalloz)
Elasticated Webbing has been patented in Europe. Patent no: EP-B-0902710, in US, Patent no: 6.006.200

1002853.PDF

(approx. 0.6Mb)

This harness has now been superseded by a new H-Design MA08 Harness.

Miller MA08 Two-Point Duraflex Fall Restraint Harness

Rear and Front D Rings, with Teflon Finish

Harness user instructions 

Feel The Difference!

A High Quality general purpose Full Body safety Harness Allowing full freedom of movement, DuraFlex is one of the most comfortable height safety harnesses on the market for maintenance work, where the worker is required to crouch down and move around a worksite. This enhanced comfort guarantees optimum productivity. The webbing is treated with TEFLON to repel the oil, dirt and water which may cause the harness to erode.

  • Duraflex Webbing is Designed to Stretch and Conform to the Workers Body
  • All Miller harnesses are CE Certified and comply with EN 1361 and, where necessary, with EN 358
  • Sizes available: S (1002854), M/L (1002853), XL (1004959)

Patented Miller DuraFlex harnesses feature specially-formulated elastomer webbing that stretches to provide:

Greater Comfort

All Miller DuraFlex fall restraint harnesses conform to the shape of the worker, stretching with every movement, so there is no bunching, binding or kinking, as is the case with some other harnesses, which may cause discomfort to the user.

Improved Safety

With unsurpassed comfort, DuraFlex fall protection harnesses offer wider end-user acceptance.
More importantly, a comfortable harness is more likely to be worn properly, enhancing compliance and safety on the jobsite.

Increased Productivity

Because DuraFlex harnesses are elasticated, the worker has greater mobility with less fatigue. Also the bright, lime-green colour is readily visible which makes it easy to see whether the harness is being worn.

Increased Durability

TEFLON contributes to extend the service life of the DuraFlex harness as compared to conventional harnesses, for example...

  • An invisible high-tech protective treatment applied professionally to all DuraFlex and Manyard webbing.
  • TEFLON repels water, oil, grease, dirt and concrete dust that may cause the degradation and erosion of the harness and Manyard webbing.
  • Maintains durability and stain resistance even after repeated washing
  • TEFLON does not change the webbing's look, feel or breathability.

Technical Specifications:

Dorsal D-Ring

  • Raw Material : Stainless steel
  • Dimensions : 48 mm Ø7mm
  • Breaking Strength : > 5000 daN

Front D rings

  • Raw Material : Stainless steel
  • Breaking Strength : > 5000 daN

Performance

  • Breaking Strength : > 15 KN
  • Operating Temperature: -30°C to +50°C

General Information

  • Weight (kg) : approx. 1.1 kg

Certification and Conformity

  • EC Category PPE: Class 3
  • Standards: EN361
  • European Directives: 89/686/EEC
  • Quality Assurance: ISO 9001 / 2000
  • EC Certification Number: 333
  • EC Attestation Number: 0082/490/160/08/00/0257
  • Laboratory: APAVE Lyonnaise

Manufactured by Sperian (Formerly Bacou-Dalloz)
Elasticated Webbing has been patented in Europe. Patent no: EP-B-0902710, in US, Patent no: 6.006.200

1002853.PDF

(approx. 0.6Mb)

Pricing

Unfortunately this product has been discontinued and/or is no longer available. Please contact us for details on possible alternative products.

Contact Us About This Product

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Top