LIFTINGSAFETY

Crosby HG223 Hook & Hook Turnbuckles - Range from 180kg to 2270kg

Crosby Hook & Hook Turnbuckles for Holding And Tensioning

Model: 

Crosby HG-223 / HHT-2442


Meets the performance requirements of Federal Specifications FF-T-791b, Type 1 Form 1 - CLASS 5, and ASTM F-1145, except for those provisions required of the contractor.

  • End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalising.
  • Hot Dip galvanized steel.
  • Hooks are forged with a greater cross sectional area that results in a stronger hook with better fatigueproperties.
  • TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.
  • Modified UNJ thread on end fittings for improved fatigue properties.
  • Body has UNC threads.
  • Lock Nuts available for all sizes.
  • Fatigue Rated.
  • Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proofload and temperature requirements.  Importantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.

Metric Dimensions & Specifications

Thread Diameter & Take Up HG-223 Stock No. Working Load Limit (t)* Weight Each (kg) Dimensions (mm)
(in.) (mm) A D E Closed F J Open K Closed M Open N Closed BB
1/4 x 4 † 6.35 x 102 1030011 0.18 0.15 6.35 11.2 42.3 32.3 249 187 310 208 103
5/16 x 4-1/2 † 7.94 x 114 1030039 0.32 0.24 7.94 12.7 50.7 38.1 294 218 358 243 116
3/8 x 6 † 9.53 x 152 1030057 0.45 0.38 9.53 14.2 57.8 44.7 387 270 453 301 155
1/2 x 6 12.7 x 152 1030075 0.68 0.85 12.7 16.5 89.7 57.9 457 335 527 375 153
1/2 x 12 12.7 x 305 1030119 0.68 1.26 12.7 16.5 89.2 57.9 769 495 839 535 314
5/8 x 6 15.9 x 305 1030137 1.02 1.46 15.9 22.9 108 71.4 495 368 572 419 153
5/8 x 12 15.9 x 305 1030173 1.02 2.08 15.9 22.9 107 71.4 809 529 885 580 315
3/4 x 6 19.1 x 152 1030191 1.36 1.91 19.1 24.9 129 84.6 538 406 620 467 156
3/4 x 12 19.1 x 305 1030235 1.36 3.14 19.1 24.9 128 84.6 853 568 935 630 320
3/4 x 18 19.1 x 457 1030253 1.36 3.92 19.1 24.9 129 84.6 1158 721 1240 782 471
7/8 x 12 22.2 x 305 1030271 1.81 4.47 22.2 28.7 148 96 886 597 972 667 309
1 x 12 25.4 x 305 1030333 2.27 6.7 25.4 31.8 167 108 929 637 1019 714 309

Imperial Dimensions & Specifications

Thread
Dia. &
Take Up
(in.)
HG-223 Stock
No.
Working
Load Limit
(lbs.)*
Weight
Each
(lbs.)
Dimensions
(in.)
A D E
Closed
F J
Open
K
Closed
M
Open
N
Closed
BB
1/4 x 4 1030011 400 .30 .25 .45 1.59 1.27 11.12 7.12 11.94 7.94 4.00
5/16 x 4-1/2 1030039 700 .47 .31 .50 1.94 1.50 12.81 8.31 13.81 9.31 4.50
3/8 x 6 1030057 1000 .78 .38 .56 2.30 1.77 16.50 10.50 17.72 11.72 6.00
1/2 x 6 1030075 1500 1.60 .50 .66 2.94 2.28 18.82 11.82 20.38 13.38 6.00
1/2 x 12 1030119 1500 2.28 .50 .66 2.94 2.28 30.82 17.82 32.38 19.38 12.00
5/8 x 6 1030137 2250 2.75 .63 .90 3.69 2.81 20.50 13.25 22.50 15.25 6.00
5/8 x 12 1030173 2250 3.50 .63 .90 3.69 2.81 32.50 19.25 34.50 21.25 12.00
3/4 x 6 1030191 3000 3.89 .75 .98 4.52 3.33 22.38 14.88 24.78 17.28 6.00
3/4 x 12 1030235 3000 5.43 .75 .98 4.52 3.33 34.38 20.88 36.78 23.28 12.00
3/4 x 18 1030253 3000 8.12 .75 .98 4.52 3.33 46.38 26.88 48.78 29.28 18.00
7/8 x 12 1030271 4000 8.10 .88 1.13 5.19 3.78 36.00 22.25 38.75 25.00 12.00
1 x 12 1030333 5000 11.93 1.00 1.25 5.84 4.25 37.63 23.63 40.69 26.69 12.00

 

Crosby-catalogue-page-number-161.pdf

Crosby-catalogue-page-number-161.pdf

(approx. 0.2Mb)

Unfortunately this product has been discontinued and/or is no longer available. Please contact us for details on possible alternative products.

Meets the performance requirements of Federal Specifications FF-T-791b, Type 1 Form 1 - CLASS 5, and ASTM F-1145, except for those provisions required of the contractor.

  • End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalising.
  • Hot Dip galvanized steel.
  • Hooks are forged with a greater cross sectional area that results in a stronger hook with better fatigueproperties.
  • TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.
  • Modified UNJ thread on end fittings for improved fatigue properties.
  • Body has UNC threads.
  • Lock Nuts available for all sizes.
  • Fatigue Rated.
  • Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proofload and temperature requirements.  Importantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.

Metric Dimensions & Specifications

Thread Diameter & Take Up HG-223 Stock No. Working Load Limit (t)* Weight Each (kg) Dimensions (mm)
(in.) (mm) A D E Closed F J Open K Closed M Open N Closed BB
1/4 x 4 † 6.35 x 102 1030011 0.18 0.15 6.35 11.2 42.3 32.3 249 187 310 208 103
5/16 x 4-1/2 † 7.94 x 114 1030039 0.32 0.24 7.94 12.7 50.7 38.1 294 218 358 243 116
3/8 x 6 † 9.53 x 152 1030057 0.45 0.38 9.53 14.2 57.8 44.7 387 270 453 301 155
1/2 x 6 12.7 x 152 1030075 0.68 0.85 12.7 16.5 89.7 57.9 457 335 527 375 153
1/2 x 12 12.7 x 305 1030119 0.68 1.26 12.7 16.5 89.2 57.9 769 495 839 535 314
5/8 x 6 15.9 x 305 1030137 1.02 1.46 15.9 22.9 108 71.4 495 368 572 419 153
5/8 x 12 15.9 x 305 1030173 1.02 2.08 15.9 22.9 107 71.4 809 529 885 580 315
3/4 x 6 19.1 x 152 1030191 1.36 1.91 19.1 24.9 129 84.6 538 406 620 467 156
3/4 x 12 19.1 x 305 1030235 1.36 3.14 19.1 24.9 128 84.6 853 568 935 630 320
3/4 x 18 19.1 x 457 1030253 1.36 3.92 19.1 24.9 129 84.6 1158 721 1240 782 471
7/8 x 12 22.2 x 305 1030271 1.81 4.47 22.2 28.7 148 96 886 597 972 667 309
1 x 12 25.4 x 305 1030333 2.27 6.7 25.4 31.8 167 108 929 637 1019 714 309

Imperial Dimensions & Specifications

Thread
Dia. &
Take Up
(in.)
HG-223 Stock
No.
Working
Load Limit
(lbs.)*
Weight
Each
(lbs.)
Dimensions
(in.)
A D E
Closed
F J
Open
K
Closed
M
Open
N
Closed
BB
1/4 x 4 1030011 400 .30 .25 .45 1.59 1.27 11.12 7.12 11.94 7.94 4.00
5/16 x 4-1/2 1030039 700 .47 .31 .50 1.94 1.50 12.81 8.31 13.81 9.31 4.50
3/8 x 6 1030057 1000 .78 .38 .56 2.30 1.77 16.50 10.50 17.72 11.72 6.00
1/2 x 6 1030075 1500 1.60 .50 .66 2.94 2.28 18.82 11.82 20.38 13.38 6.00
1/2 x 12 1030119 1500 2.28 .50 .66 2.94 2.28 30.82 17.82 32.38 19.38 12.00
5/8 x 6 1030137 2250 2.75 .63 .90 3.69 2.81 20.50 13.25 22.50 15.25 6.00
5/8 x 12 1030173 2250 3.50 .63 .90 3.69 2.81 32.50 19.25 34.50 21.25 12.00
3/4 x 6 1030191 3000 3.89 .75 .98 4.52 3.33 22.38 14.88 24.78 17.28 6.00
3/4 x 12 1030235 3000 5.43 .75 .98 4.52 3.33 34.38 20.88 36.78 23.28 12.00
3/4 x 18 1030253 3000 8.12 .75 .98 4.52 3.33 46.38 26.88 48.78 29.28 18.00
7/8 x 12 1030271 4000 8.10 .88 1.13 5.19 3.78 36.00 22.25 38.75 25.00 12.00
1 x 12 1030333 5000 11.93 1.00 1.25 5.84 4.25 37.63 23.63 40.69 26.69 12.00

 

Crosby-catalogue-page-number-161.pdf

Crosby-catalogue-page-number-161.pdf

(approx. 0.2Mb)

Unfortunately this product has been discontinued and/or is no longer available. Please contact us for details on possible alternative products.

Contact Us About This Product

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Top