LIFTINGSAFETY

Heavy Duty Double Nut Bolt Type Dee Shackle - Range 34 tonne to 225 tonne

Forged Alloy Steel Galvanised Safety Dee Shackle with Two Nuts and Stainless Steel Cotter Pin

Model: 

HDDN-4832


This page has expired. Unfortunately these Heavy Duty Shackles are no longer available. Please see our full range of lifting shackles or Contact us with your requirements for a possible alternative.

  • Material: Forged alloy steel quenched and tempered.
  • Safety factor: 5 times.
  • Finish: Galvanised with stainless steel cotter pins.
  • Temperature range: -40°C up to +200°C, Polar Rated.
  • Shackles WLL 34 and 60 ton are NOT supplied with an eyebolt (on pin).
  • Made in the EU.
  • Supplied with certificate of conformity.
  • 3.1 material certification available on request.
  • Ensure that the load is centralized on the pin. When there is too much space in the jaw gap, we advise to use washers - These are available on request if required.
  • Non-standard sizes or custom products available on request.

Dimensions and Specifications

Part Number WLL (t) MBL (t) Thimble size inch A (mm) B (mm) C (mm) D (mm) E (mm) L (mm) X (mm) Y (mm) Weight (kg)
T24371 34 170 8 1/2 - 10 50 65 140 285 115 345 240 425 23
T24372 60 300 11 - 13 70 76 175 350 165 430 315 541 59
T24373 85 425 14 - 15 80 90 220 390 178 505 380 604 85
T24374 110 550 16 - 18 90 100 254 430 210 575 434 675 122
T24375 130 650 19 - 21 100 114 290 480 235 620 480 755 170
T24376 200 1000 19 - 21 125 133 300 600 265 695 550 924 282
T24377 225 1125 22 - 24 130 146 333 720 305 735 593 1075 349
Heavy Duty Double Nut Shackle Dimensions

Tolerance: Inside length ± 7.5%, all other forged parts ± 5%, machined parts ± 1 mm

Special double nut shackle

Part Number WLL (t) MBL (t) Thimble size inch A (mm) B (mm) C (mm) D (mm) E (mm) L (mm) X (mm) Y (mm) Weight (kg)
T24378 200 498 18 105 120 254 500 228 610 464 779 205
T24379 200 498 21 115 125 285 520 238 655 510 797 244
T24380 250 612 15 115 125 220 400 238 595 450 697 203
T24381 250 612 18 125 130 254 500 238 650 504 809 248
T24382 250 612 21 125 130 285 480 260 675 530 800 274

Tolerance: Inside length ± 7.5%, all other forged parts ± 5%, machined parts ± 1 mm

Unfortunately this product has been discontinued and/or is no longer available. Please contact us for details on possible alternative products.

This page has expired. Unfortunately these Heavy Duty Shackles are no longer available. Please see our full range of lifting shackles or Contact us with your requirements for a possible alternative.

  • Material: Forged alloy steel quenched and tempered.
  • Safety factor: 5 times.
  • Finish: Galvanised with stainless steel cotter pins.
  • Temperature range: -40°C up to +200°C, Polar Rated.
  • Shackles WLL 34 and 60 ton are NOT supplied with an eyebolt (on pin).
  • Made in the EU.
  • Supplied with certificate of conformity.
  • 3.1 material certification available on request.
  • Ensure that the load is centralized on the pin. When there is too much space in the jaw gap, we advise to use washers - These are available on request if required.
  • Non-standard sizes or custom products available on request.

Dimensions and Specifications

Part Number WLL (t) MBL (t) Thimble size inch A (mm) B (mm) C (mm) D (mm) E (mm) L (mm) X (mm) Y (mm) Weight (kg)
T24371 34 170 8 1/2 - 10 50 65 140 285 115 345 240 425 23
T24372 60 300 11 - 13 70 76 175 350 165 430 315 541 59
T24373 85 425 14 - 15 80 90 220 390 178 505 380 604 85
T24374 110 550 16 - 18 90 100 254 430 210 575 434 675 122
T24375 130 650 19 - 21 100 114 290 480 235 620 480 755 170
T24376 200 1000 19 - 21 125 133 300 600 265 695 550 924 282
T24377 225 1125 22 - 24 130 146 333 720 305 735 593 1075 349
Heavy Duty Double Nut Shackle Dimensions

Tolerance: Inside length ± 7.5%, all other forged parts ± 5%, machined parts ± 1 mm

Special double nut shackle

Part Number WLL (t) MBL (t) Thimble size inch A (mm) B (mm) C (mm) D (mm) E (mm) L (mm) X (mm) Y (mm) Weight (kg)
T24378 200 498 18 105 120 254 500 228 610 464 779 205
T24379 200 498 21 115 125 285 520 238 655 510 797 244
T24380 250 612 15 115 125 220 400 238 595 450 697 203
T24381 250 612 18 125 130 254 500 238 650 504 809 248
T24382 250 612 21 125 130 285 480 260 675 530 800 274

Tolerance: Inside length ± 7.5%, all other forged parts ± 5%, machined parts ± 1 mm

Unfortunately this product has been discontinued and/or is no longer available. Please contact us for details on possible alternative products.

Contact Us About This Product

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Top