Crosby A-344 Welded Master Link - Range from 1600kg to 45,000kg

Crosby Welded Master Link with Engineered Flat for use with S-1325A coupler link.

Model: 

Crosby A-344 / CWML-2698


This page has now expired. Please click to be re-directed to the new and updated page for the Crosby A344 Welded Master Links.

  • Alloy Steel - Quenched and Tempered.
  • Individually Proof Tested to values shown, with certification.
  • Proof Tested with 70% inside width special fixtures sized to prevent localised point loading per EN 1677-4.
  • Each link has a Product Identification Code (PIC) for material traceability, along with the size and the name Crosby® or “CG”.
  • Large inside width and length to allow additional room for sling hardware and crane hook.
  • Engineered Flat for use with S-1325A coupler link.
  • Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these links meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
  • Master links are type approved to DNV Certification Notes 2.7-1- Offshore Containers. These Crosby master links are 100% proof tested and impact tested. The tests are conducted by Crosby and 3.1 test certification is available upon request.
  • 12mm through 32mm have Engineered Flat.

Ultimate Load is 5 times the Working Load Limit. Applications with wire rope and synthetic sling generally require a design factor of 5. Based on single leg sling in-line load), or resultant load on multiple legs with an included angle less than or equal to 120 degrees. ** Proof Test Load equals or exceeds the requirement of ASTM
A952(8.1) and ASME B30.9.

crosby-catalogue-page-number-138.pdf

crosby-catalogue-page-number-138.pdf

(approx. 0.2Mb)

Unfortunately this product has been discontinued and/or is no longer available. Please contact us for details on possible alternative products.

This page has now expired. Please click to be re-directed to the new and updated page for the Crosby A344 Welded Master Links.

  • Alloy Steel - Quenched and Tempered.
  • Individually Proof Tested to values shown, with certification.
  • Proof Tested with 70% inside width special fixtures sized to prevent localised point loading per EN 1677-4.
  • Each link has a Product Identification Code (PIC) for material traceability, along with the size and the name Crosby® or “CG”.
  • Large inside width and length to allow additional room for sling hardware and crane hook.
  • Engineered Flat for use with S-1325A coupler link.
  • Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these links meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
  • Master links are type approved to DNV Certification Notes 2.7-1- Offshore Containers. These Crosby master links are 100% proof tested and impact tested. The tests are conducted by Crosby and 3.1 test certification is available upon request.
  • 12mm through 32mm have Engineered Flat.

Ultimate Load is 5 times the Working Load Limit. Applications with wire rope and synthetic sling generally require a design factor of 5. Based on single leg sling in-line load), or resultant load on multiple legs with an included angle less than or equal to 120 degrees. ** Proof Test Load equals or exceeds the requirement of ASTM
A952(8.1) and ASME B30.9.

crosby-catalogue-page-number-138.pdf

crosby-catalogue-page-number-138.pdf

(approx. 0.2Mb)

Unfortunately this product has been discontinued and/or is no longer available. Please contact us for details on possible alternative products.

Contact Us About This Product

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Top