- Home/
- Lifting Equipment/
- Rigging Gear; Riggers Lifting Equipment/
- Crosby Lifting Equipment & Rigging Catalogue/
- Crosby Lifting Hooks (Hoist Hooks)/
- Crosby Eye Hooks/
- Crosby 320 Eye Hoist Safety Sling Hooks - Range from 750kg to 60,000kg

Crosby 320 Eye Hoist Safety Sling Hooks - Range from 750kg to 60,000kg
Crosby Eye Hoist Hooks. Available as either Carbon self-colour, Carbon Galvanised or Alloy.
Crosby 320 / CEHH-2396



The Crosby 320 Eye Hoist Hooks from 750kg to 60 tonnes SWL are the most complete line of eye hoist hook and are available in carbon steel and alloy steel. They are designed with a 5:1 Design Factor. Further information below:
- Eye hooks are load rated.
- Proper design, careful forging and precision controlled quenched and tempering give maximum strength without excessive weight and bulk.
- Every Crosby Eye Hook has a pre-drilled cam which can be equipped with a latch. Even years after purchase of the original hook, latch assemblies can be added
- Chemical analysis and tensile tests performed on each PIC to verify chemistry and mechanical properties.
- Hoist hooks incorporate two types of strategically placed markings forged into the product
The following additional features have been incorporated in the new Crosby S-320N Eye Hoist Hooks. (Sizes 3/4 ton Carbon through 22 ton Alloy.)
- Can be metric rated at 5:1 design factor.
- Can be proof tested to 2-1/2 times the working Load Limit.
- Low profile hook tip.
- New integrated latch (S-4320) meets the world class standard for lifting.
- Heavy duty stamped latch interlocks with the hook tip.
- High cycle, long life spring.
- When secured with proper cotter pin through the hole in the tip of hook, meets the intent of OSHA Rule 1926.550(g) for personnel hoisting.
- Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.
Metric Specifications
See imperial tab above for imperial specifications.
S320 - No Latch, L320 - With Latch.
320C/320CN - Carbon, 320A/320AN Alloy. (N represents new style of hook)
S.C. - Self-coloured, Galv. - Galvanised Finish.
Working Load Limit (t)* | Hook ID Code | Eye Hook Stock No. | Weight Each (kg) | Replacement Latch Kits | ||||||
Carbon | Alloy | S-320C S-320CN S.C. | G-320CN Galv. | S-320A S-320AN S.C. | L-320AN S.C. | S-4320 Stock No. | PL Stock No. | SS-4055 Stock No. | ||
3/4 | 1.25 | D | 1022200 | 1022208 | 1022375 | 1022380 | 0.28 | 1096325 | - | - |
1 | 1.6 | F | 1022211 | 1022219 | 1022386 | 1022391 | 0.40 | 1096374 | - | - |
1.6 | 2.5 | G | 1022222 | 1022230 | 1022397 | 1022402 | 0.65 | 1096421 | - | - |
2 | 3.2 | H | 1022233 | 1022241 | 1022406 | 1022413 | 0.94 | 1096468 | - | - |
3.2 | 5.4 | I | 1022244 | 1022249 | 1022419 | 1022424 | 1.95 | 1096515 | 1092000 | - |
5 | 8 | J | 1022255 | 1022262 | 1022430 | 1022435 | 3.76 | 1096562 | 1092001 | - |
7.5 | 11.5 | K | 1022264 | 1022274 | 1022441 | 1022446 | 6.80 | 1096609 | 1092002 | - |
10 | 16 | L | 1022285 | 1022452 | 1022452 | 1022457 | 9.42 | 1096657 | 1092003 | - |
15 | 22 | N | 1022288 | 1022296 | 1022465 | 1022468 | 17.9 | 1096704 | 1092004 | - |
20 | 31.5 | O | 1023289 | - | 1023546 | - | 27.2 | - | 1093716 | 1090161 |
25 | 37 | P | 1023305 | - | 1023564 | - | 47.6 | - | 1093717 | 1090189 |
30 | 45 | S | 1023323 | - | 1023582 | - | 67 | - | 1093718 | 1090189 |
40 | 60 | T | 1023341 | - | 1023608 | - | 103 | - | 1093719 | 1090205 |
Dimensions
Hook ID Code* | Dimensions (mm) | |||||||||||||
C | D | F | G | J | K | M | N | O † | O2 †† | Q | T † | T2 †† | AA | |
D | 85.0 | 72.0 | 31.8 | 18.5 | 22.9 | 16.0 | 16.0 | 9.14 | 22.6 | - | 19.1 | 22.1 | - | 38.1 |
F | 97.0 | 79.0 | 35.1 | 21.3 | 23.6 | 18.0 | 18.0 | 10.7 | 23.1 | - | 23.1 | 24.9 | - | 50.8 |
G | 105 | 89.5 | 38.1 | 25.4 | 25.4 | 22.4 | 22.4 | 14.0 | 25.4 | - | 28.7 | 26.2 | - | 50.8 |
H | 119 | 101 | 41.4 | 28.7 | 28.7 | 23.9 | 23.8 | 14.7 | 27.7 | - | 31.8 | 29.5 | - | 50.8 |
I | 147 | 122 | 51.0 | 36.6 | 37.3 | 33.3 | 33.3 | 18.3 | 34.5 | 25.4 | 39.6 | 38.9 | 38.1 | 63.5 |
J | 187 | 159 | 63.5 | 46.0 | 44.5 | 42.2 | 42.2 | 22.9 | 40.9 | 33.3 | 51.0 | 49.8 | 47.7 | 76.2 |
K | 230 | 189 | 76.0 | 57.0 | 58.0 | 47.8 | 41.4 | 28.2 | 53.0 | 46.0 | 62.0 | 62.5 | 57.2 | 102 |
L | 256 | 211 | 82.5 | 66.0 | 63.5 | 55.5 | 49.3 | 32.3 | 57.5 | 51.0 | 72.0 | 66.5 | 58.7 | 102 |
N | 318 | 262 | 108 | 76.0 | 84.0 | 68.5 | 60.5 | 39.6 | 76.5 | 69.8 | 89.0 | 72.0 | 65.0 | 127 |
O | 357 | 346 | 127 | 92.0 | 102 | 76.0 | 76.2 | 44.5 | 82.5 | - | 89.0 | 87.5 | - | 165 |
P | 462 | 357 | 137 | 116 | 108 | 102 | 81.0 | 51.0 | 76.0 | - | 114 | 98.5 | - | 178 |
S | 511 | 392 | 152 | 129 | 121 | 114 | 82.6 | 55.4 | 86.0 | - | 125 | 121 | - | 203 |
T | 602 | 470 | 178 | 152 | 146 | 140 | 99.3 | 64.3 | 105 | - | 145 | 145 | - | 254 |

Eye Hooks (3/4 TC - 22TA), Proof load is 2.5 times Working Load Limit. Eye Hooks (20 TC - 60TA), Proof Load is 2 times Working Load Limit. All carbon hooks-average straightening loads (ultimate load) is 5 times Working Load Limit. Alloy eye hooks 1 ton through 22 ton-average straightening load (ultimate load) is 5 times Working Load Limit. Alloy eye hooks 30 tons through 60 tons-average straightening load (ultimate load) is 4.5 times Working Load Limit.
As advertised in Crosby General Catalogue 2009 Page 94, and previously in Crosby General Catalogue 2006 Page 93.
Dimensions
Hook ID* | Dimensions (in.) | |||||||||||||
C | D | F | G | J | K | M | N | O † | O2 †† | Q | T † | T2 †† | AA | |
D | 3.34 | 2.83 | 1.25 | .73 | .90 | .63 | .63 | .36 | .89 | - | .75 | .87 | - | 1.50 |
F | 3.81 | 3.11 | 1.38 | .84 | .93 | .71 | .71 | .42 | .91 | - | .91 | .98 | - | 2.00 |
G | 4.14 | 3.53 | 1.50 | 1.00 | 1.00 | .88 | .88 | .55 | 1.00 | - | 1.13 | 1.03 | - | 2.00 |
H | 4.69 | 3.97 | 1.63 | 1.13 | 1.13 | .94 | .94 | .58 | 1.09 | - | 1.25 | 1.16 | - | 2.00 |
I | 5.77 | 4.81 | 2.00 | 1.44 | 1.47 | 1.31 | 1.31 | .72 | 1.36 | 1.00 | 1.56 | 1.53 | 1.50 | 2.50 |
J | 7.37 | 6.27 | 2.50 | 1.81 | 1.75 | 1.66 | 1.66 | .90 | 1.61 | 1.31 | 2.00 | 1.96 | 1.88 | 3.00 |
K | 9.07 | 7.45 | 3.00 | 2.25 | 2.29 | 1.88 | 1.63 | 1.11 | 2.08 | 1.81 | 2.44 | 2.47 | 2.25 | 4.00 |
L | 10.08 | 8.30 | 3.25 | 2.59 | 2.50 | 2.19 | 1.94 | 1.27 | 2.27 | 2.00 | 2.84 | 2.62 | 2.31 | 4.00 |
N | 12.53 | 10.30 | 4.25 | 3.00 | 3.30 | 2.69 | 2.38 | 1.56 | 3.02 | 2.75 | 3.50 | 2.83 | 2.56 | 5.00 |
O | 14.06 | 13.62 | 5.00 | 3.62 | 4.00 | 3.00 | 3.00 | 1.75 | 3.25 | - | 3.50 | 3.44 | - | 6.50 |
P | 18.19 | 14.06 | 5.38 | 4.56 | 4.25 | 4.00 | 3.19 | 2.00 | 3.00 | - | 4.50 | 3.88 | - | 7.00 |
S | 20.12 | 15.44 | 6.00 | 5.06 | 4.75 | 4.50 | 3.25 | 2.18 | 3.38 | - | 4.94 | 4.75 | - | 8.00 |
T | 23.72 | 18.50 | 7.00 | 6.00 | 5.75 | 5.50 | 3.91 | 2.53 | 4.12 | - | 5.69 | 5.69 | - | 10.00 |
Eye Hooks (3/4 TC - 22TA), Proof load is 2.5 times Working Load Limit. Eye Hooks (20 TC - 60TA), Proof Load is 2 times Working Load Limit. All carbon hooks-average straightening loads (ultimate load) is 5 times Working Load Limit. Alloy eye hooks 1 ton through 22 ton-average straightening load (ultimate load) is 5 times Working Load Limit. Alloy eye hooks 30 tons through 60 tons-average straightening load (ultimate load) is 4.5 times Working Load Limit.
As advertised in Crosby General Catalogue 2009 Page 94, and previously in Crosby General Catalogue 2006 Page 93.
The Crosby 320 Eye Hoist Hooks from 750kg to 60 tonnes SWL are the most complete line of eye hoist hook and are available in carbon steel and alloy steel. They are designed with a 5:1 Design Factor. Further information below:
- Eye hooks are load rated.
- Proper design, careful forging and precision controlled quenched and tempering give maximum strength without excessive weight and bulk.
- Every Crosby Eye Hook has a pre-drilled cam which can be equipped with a latch. Even years after purchase of the original hook, latch assemblies can be added
- Chemical analysis and tensile tests performed on each PIC to verify chemistry and mechanical properties.
- Hoist hooks incorporate two types of strategically placed markings forged into the product
The following additional features have been incorporated in the new Crosby S-320N Eye Hoist Hooks. (Sizes 3/4 ton Carbon through 22 ton Alloy.)
- Can be metric rated at 5:1 design factor.
- Can be proof tested to 2-1/2 times the working Load Limit.
- Low profile hook tip.
- New integrated latch (S-4320) meets the world class standard for lifting.
- Heavy duty stamped latch interlocks with the hook tip.
- High cycle, long life spring.
- When secured with proper cotter pin through the hole in the tip of hook, meets the intent of OSHA Rule 1926.550(g) for personnel hoisting.
- Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.
Metric Specifications
See imperial tab above for imperial specifications.
S320 - No Latch, L320 - With Latch.
320C/320CN - Carbon, 320A/320AN Alloy. (N represents new style of hook)
S.C. - Self-coloured, Galv. - Galvanised Finish.
Working Load Limit (t)* | Hook ID Code | Eye Hook Stock No. | Weight Each (kg) | Replacement Latch Kits | ||||||
Carbon | Alloy | S-320C S-320CN S.C. | G-320CN Galv. | S-320A S-320AN S.C. | L-320AN S.C. | S-4320 Stock No. | PL Stock No. | SS-4055 Stock No. | ||
3/4 | 1.25 | D | 1022200 | 1022208 | 1022375 | 1022380 | 0.28 | 1096325 | - | - |
1 | 1.6 | F | 1022211 | 1022219 | 1022386 | 1022391 | 0.40 | 1096374 | - | - |
1.6 | 2.5 | G | 1022222 | 1022230 | 1022397 | 1022402 | 0.65 | 1096421 | - | - |
2 | 3.2 | H | 1022233 | 1022241 | 1022406 | 1022413 | 0.94 | 1096468 | - | - |
3.2 | 5.4 | I | 1022244 | 1022249 | 1022419 | 1022424 | 1.95 | 1096515 | 1092000 | - |
5 | 8 | J | 1022255 | 1022262 | 1022430 | 1022435 | 3.76 | 1096562 | 1092001 | - |
7.5 | 11.5 | K | 1022264 | 1022274 | 1022441 | 1022446 | 6.80 | 1096609 | 1092002 | - |
10 | 16 | L | 1022285 | 1022452 | 1022452 | 1022457 | 9.42 | 1096657 | 1092003 | - |
15 | 22 | N | 1022288 | 1022296 | 1022465 | 1022468 | 17.9 | 1096704 | 1092004 | - |
20 | 31.5 | O | 1023289 | - | 1023546 | - | 27.2 | - | 1093716 | 1090161 |
25 | 37 | P | 1023305 | - | 1023564 | - | 47.6 | - | 1093717 | 1090189 |
30 | 45 | S | 1023323 | - | 1023582 | - | 67 | - | 1093718 | 1090189 |
40 | 60 | T | 1023341 | - | 1023608 | - | 103 | - | 1093719 | 1090205 |
Dimensions
Hook ID Code* | Dimensions (mm) | |||||||||||||
C | D | F | G | J | K | M | N | O † | O2 †† | Q | T † | T2 †† | AA | |
D | 85.0 | 72.0 | 31.8 | 18.5 | 22.9 | 16.0 | 16.0 | 9.14 | 22.6 | - | 19.1 | 22.1 | - | 38.1 |
F | 97.0 | 79.0 | 35.1 | 21.3 | 23.6 | 18.0 | 18.0 | 10.7 | 23.1 | - | 23.1 | 24.9 | - | 50.8 |
G | 105 | 89.5 | 38.1 | 25.4 | 25.4 | 22.4 | 22.4 | 14.0 | 25.4 | - | 28.7 | 26.2 | - | 50.8 |
H | 119 | 101 | 41.4 | 28.7 | 28.7 | 23.9 | 23.8 | 14.7 | 27.7 | - | 31.8 | 29.5 | - | 50.8 |
I | 147 | 122 | 51.0 | 36.6 | 37.3 | 33.3 | 33.3 | 18.3 | 34.5 | 25.4 | 39.6 | 38.9 | 38.1 | 63.5 |
J | 187 | 159 | 63.5 | 46.0 | 44.5 | 42.2 | 42.2 | 22.9 | 40.9 | 33.3 | 51.0 | 49.8 | 47.7 | 76.2 |
K | 230 | 189 | 76.0 | 57.0 | 58.0 | 47.8 | 41.4 | 28.2 | 53.0 | 46.0 | 62.0 | 62.5 | 57.2 | 102 |
L | 256 | 211 | 82.5 | 66.0 | 63.5 | 55.5 | 49.3 | 32.3 | 57.5 | 51.0 | 72.0 | 66.5 | 58.7 | 102 |
N | 318 | 262 | 108 | 76.0 | 84.0 | 68.5 | 60.5 | 39.6 | 76.5 | 69.8 | 89.0 | 72.0 | 65.0 | 127 |
O | 357 | 346 | 127 | 92.0 | 102 | 76.0 | 76.2 | 44.5 | 82.5 | - | 89.0 | 87.5 | - | 165 |
P | 462 | 357 | 137 | 116 | 108 | 102 | 81.0 | 51.0 | 76.0 | - | 114 | 98.5 | - | 178 |
S | 511 | 392 | 152 | 129 | 121 | 114 | 82.6 | 55.4 | 86.0 | - | 125 | 121 | - | 203 |
T | 602 | 470 | 178 | 152 | 146 | 140 | 99.3 | 64.3 | 105 | - | 145 | 145 | - | 254 |

Eye Hooks (3/4 TC - 22TA), Proof load is 2.5 times Working Load Limit. Eye Hooks (20 TC - 60TA), Proof Load is 2 times Working Load Limit. All carbon hooks-average straightening loads (ultimate load) is 5 times Working Load Limit. Alloy eye hooks 1 ton through 22 ton-average straightening load (ultimate load) is 5 times Working Load Limit. Alloy eye hooks 30 tons through 60 tons-average straightening load (ultimate load) is 4.5 times Working Load Limit.
As advertised in Crosby General Catalogue 2009 Page 94, and previously in Crosby General Catalogue 2006 Page 93.
Dimensions
Hook ID* | Dimensions (in.) | |||||||||||||
C | D | F | G | J | K | M | N | O † | O2 †† | Q | T † | T2 †† | AA | |
D | 3.34 | 2.83 | 1.25 | .73 | .90 | .63 | .63 | .36 | .89 | - | .75 | .87 | - | 1.50 |
F | 3.81 | 3.11 | 1.38 | .84 | .93 | .71 | .71 | .42 | .91 | - | .91 | .98 | - | 2.00 |
G | 4.14 | 3.53 | 1.50 | 1.00 | 1.00 | .88 | .88 | .55 | 1.00 | - | 1.13 | 1.03 | - | 2.00 |
H | 4.69 | 3.97 | 1.63 | 1.13 | 1.13 | .94 | .94 | .58 | 1.09 | - | 1.25 | 1.16 | - | 2.00 |
I | 5.77 | 4.81 | 2.00 | 1.44 | 1.47 | 1.31 | 1.31 | .72 | 1.36 | 1.00 | 1.56 | 1.53 | 1.50 | 2.50 |
J | 7.37 | 6.27 | 2.50 | 1.81 | 1.75 | 1.66 | 1.66 | .90 | 1.61 | 1.31 | 2.00 | 1.96 | 1.88 | 3.00 |
K | 9.07 | 7.45 | 3.00 | 2.25 | 2.29 | 1.88 | 1.63 | 1.11 | 2.08 | 1.81 | 2.44 | 2.47 | 2.25 | 4.00 |
L | 10.08 | 8.30 | 3.25 | 2.59 | 2.50 | 2.19 | 1.94 | 1.27 | 2.27 | 2.00 | 2.84 | 2.62 | 2.31 | 4.00 |
N | 12.53 | 10.30 | 4.25 | 3.00 | 3.30 | 2.69 | 2.38 | 1.56 | 3.02 | 2.75 | 3.50 | 2.83 | 2.56 | 5.00 |
O | 14.06 | 13.62 | 5.00 | 3.62 | 4.00 | 3.00 | 3.00 | 1.75 | 3.25 | - | 3.50 | 3.44 | - | 6.50 |
P | 18.19 | 14.06 | 5.38 | 4.56 | 4.25 | 4.00 | 3.19 | 2.00 | 3.00 | - | 4.50 | 3.88 | - | 7.00 |
S | 20.12 | 15.44 | 6.00 | 5.06 | 4.75 | 4.50 | 3.25 | 2.18 | 3.38 | - | 4.94 | 4.75 | - | 8.00 |
T | 23.72 | 18.50 | 7.00 | 6.00 | 5.75 | 5.50 | 3.91 | 2.53 | 4.12 | - | 5.69 | 5.69 | - | 10.00 |
Eye Hooks (3/4 TC - 22TA), Proof load is 2.5 times Working Load Limit. Eye Hooks (20 TC - 60TA), Proof Load is 2 times Working Load Limit. All carbon hooks-average straightening loads (ultimate load) is 5 times Working Load Limit. Alloy eye hooks 1 ton through 22 ton-average straightening load (ultimate load) is 5 times Working Load Limit. Alloy eye hooks 30 tons through 60 tons-average straightening load (ultimate load) is 4.5 times Working Load Limit.
As advertised in Crosby General Catalogue 2009 Page 94, and previously in Crosby General Catalogue 2006 Page 93.
Contact Us About This Product
If you wish to receive a quote for this product, please use the 'Pricing' tab above, this form is for general enquiries regarding this product only.
You can also Request a Quote using the Buy/Quote tab above!
You can easily add more than one item to the Quote Request. This is highly recommend as we will be able to suit your needs much more efficiently.
Share this page!

Save this QR code
for use on Smart Phones