Yale "Handy" Ratchet Lever Hoist. Lightweight Pressed Steel Body - Pull Lift Range 250kg or 500kg
Extremely Lightweight and Compact pressed steel ratchet Lever hoist.
Capacities: 250kg or 500kg.
Both closed height and bearing to bearing are a tiny 240mm on the 250kg model.
Information on the safe use of lever hoists
- Drop forged hooks.
- Free-chaining device as standard.
- Extremely Low Headroom hoist.
- High tensile zinc plated link chain (load chain).
- Hand lever with rubber grip.
This hoist is the smallest, lightest Yale ratchet lever hoist (ratchet chain puller) for professional applications. Due to the multitude of application possibilities this new ratchet lever hoist is an indispensable tool e.g. in industry, trade and service. The extreme low tare weight and the very compact design make the hoist easy to use even in confined working conditions.
The enclosed design protects the internal parts of the lever chain hoist against the ingress of dust, foreign particles and corrosion. The short and ergonomic hand lever makes the hoist easy to operate.
The standard free chaining device serves to quickly attach the load or to pull the chain through the hoist in both directions. The drop forged suspension and load hooks that yield under overload instead of breaking are made from nonageing, high tensile alloy steel. The hooks are fitted with robust safety latches and are free to rotate 360°. All parts of the disc type load brake are manufactured from high quality materials and are corrosion protected.
Yale Lever Hoist Information
Yale Hand Lever Hoists, including the Yale Handy, are versatile, portable units for pulling, tensioning, lashing and lifting of loads. The operation of the Hand Lever hoists is easy and safe. Light weight, robust malleable cast iron model, free chaining, slip clutch, stamped steel- or aluminium housing, low operating effort - in the Yale product range you will always find an optimal hoist for every type of operation. The brake system of all Yale hand lever hoists are based on the original Yale patent of the British engineer Thomas A. Weston dating back to 1875. All parts of the load brake are made of high quality materials and are protected against corrosion.
The engineering principle behind the load brake finds its rightful place in all hand lever hoists world wide. Yale exclusively uses asbestos free friction discs in all their hoists. The surface protected zinc plated alloy steel chains fulfil all the requirements of national and international standards and regulations. In accordance with safety regulations, the chain stops are designed to withstand double the rated capacity to ensure the chain does not unintentionally run free. The drop forged load and suspension hooks that yield under overload instead of breaking, are made of high tensile steel and are standard for all Yale hoists. The hooks are fitted with robust safety latches and rotate 360°.
Every Yale ratchet lever hoist is factory tested with overload. The units are supplied with a test certificate showing the serial-No. Operating instructions which contain an EC declaration of conformity are also attached to each unit.
|Capacity (kg)||Number of Chain Falls||Chain Dimensions d x p (mm)||Lift with One Full Lever Turn (mm)||Handle Pull at WLL (daN)||Weight with std. Lift (kg)|
|250||1||4 x 12||80||25||2.2|
|500||1||4 x 12||40||25||2.8|
|Capacity||A min (mm)||B (mm)||C (mm)||D (mm)||E (mm)||F (mm)||G (mm)||H (mm)||J (mm)||K (mm)||L (mm)|