Camlok HG High Grip Plate Clamp - Range from 500kg to 4000kg
Camlok High Grip Vertical Plate Lifting Clamp Useful for lifting stainless steel and hardened surface plates.
Camlok HG Series Plate Clamp
500kg, 1000kg, 2000kg, 3000kg and 4000kg SWL (safe working load) capacity options are available.
- Used on all structural steel plates up to 376 Brinell / 40 Rockwell C.
- Lifts and turns plates from the horizontal position to vertical through 180º or vice versa.
- Develops a much higher grip on plates.
- Useful for lifting stainless steel and hardened surface plates due to cold rolling
The Camlok High Grip Clamp has an additional lever in the clamping mechanism thus asserting a very high gripping force on the plate being lifted. The clamp has been designed to lift plates with hardened surfaces and for stainless steel plates. The clamp is suitable for use with materials up to 376 Brinell surface hardness. Clamps can be used for lifting and turning plates from the horizontal to vertical or vice versa. The standard clamp is fitted with a hook ring but can alternatively be supplied with a short length of chain NOTE: Clamp will mark the surface of the material being lifted.
For further information on lifting other surface hardnesses contact our sales team on +44 (0) 1977 684 600
|Standard HG clamps are not suitable for steel over 376 Brinell or 40 Rockwell C, lead, certain grades of copper and materials over 120 degrees surface temperature.|
Clamp with Chain
The Camlok series of high grip plate lifting clamps can be used on all structural steel plates and sections up to a surface hardness of 376 Brinell. They develop a much higher grip on the plate than the normal universal type and can be used for lifting and turning plates from the horizontal to vertical to horizontal through 180° or vice versa. They are particularly useful for lifting stainless steel or plates with hardened surfaces.
The stages of turning a plate from the horizontal to the vertical and back
Series HG Hook Ring
Series HG Chained
Series HG Chain
The standard clamp is fitted with a hook ring but can alternatively be supplied with a short length of chain and master link. This aids in the attachment to larger crane hooks and prevents accidental release when fast lowering. Additional jaw sizes are also available.