LIFTINGSAFETY

Tractel TOPAL ZAC Clamp for Lifting Revolving Loads with Parallel Sides - 1500kg

Clamp for Lifting Revolving Loads.

Model: 

TTZ-3326


Tractel Topal ZAC

Unfortunately this lifting clamp has been discontinued. Please see our complete range of scissor lifting clamps for a possibly suitable alternative.

Lifting and manual turning without marring of various products with parallel sides. Jaws are articulated and enable the manual rotation of the load. This clamp is fitted with a semi-automatic system which allows the laying down of the load without human intervention.

These accessories are fitted with an open position locking system allowing to lay down the load without any manual intervention. Polyurethane coated pads ensure a great adherence and avoid load marring; articulated and pivoting, they also enable load turning. Transport handles make the positioning easier. Clamping is proportional to the load, thus minimising the damage risk.

 

Instructions For Use

  1. Positioning: suspend the grab in its open position by its ring (1) (locking pawl (2) activated).
  2. To perform lifting, present the grab vertically to the product to be lifted.
  3. Lower the grab until it is applied against the load. Swivel the locking pawl (2) manually whilst starting off the lifting.
  4. Release the locking pawl (2) making sure its claw is well above the fastening screw (3) and perform lifting.
  5. When laying the load down, bring down the grab until the locking pawl automatically locks (2) onto the fastening screw (3).
  6. The grab is locked in the open position.
  7. It can be lifted up and it is ready to be used again.

 

Use of TOPAL ZAC

Specifications

Part No: Capacity (kg) Opening (mm)
ZAC1.5 390-650 1500kg 390-650mm
ZAC1.5 600-1000 1500kg 600-1000mm
ZAC 0601.pdf

Operating and Safety Instructions.

(approx. 0.2Mb)
ZAC T 6009 GB rev 2.pdf

Technical Datasheet

(approx. 0.3Mb)
Tractel Topal ZAC

Unfortunately this lifting clamp has been discontinued. Please see our complete range of scissor lifting clamps for a possibly suitable alternative.

Lifting and manual turning without marring of various products with parallel sides. Jaws are articulated and enable the manual rotation of the load. This clamp is fitted with a semi-automatic system which allows the laying down of the load without human intervention.

These accessories are fitted with an open position locking system allowing to lay down the load without any manual intervention. Polyurethane coated pads ensure a great adherence and avoid load marring; articulated and pivoting, they also enable load turning. Transport handles make the positioning easier. Clamping is proportional to the load, thus minimising the damage risk.

 

Instructions For Use

  1. Positioning: suspend the grab in its open position by its ring (1) (locking pawl (2) activated).
  2. To perform lifting, present the grab vertically to the product to be lifted.
  3. Lower the grab until it is applied against the load. Swivel the locking pawl (2) manually whilst starting off the lifting.
  4. Release the locking pawl (2) making sure its claw is well above the fastening screw (3) and perform lifting.
  5. When laying the load down, bring down the grab until the locking pawl automatically locks (2) onto the fastening screw (3).
  6. The grab is locked in the open position.
  7. It can be lifted up and it is ready to be used again.

 

Use of TOPAL ZAC

Specifications

Part No: Capacity (kg) Opening (mm)
ZAC1.5 390-650 1500kg 390-650mm
ZAC1.5 600-1000 1500kg 600-1000mm
ZAC 0601.pdf

Operating and Safety Instructions.

(approx. 0.2Mb)
ZAC T 6009 GB rev 2.pdf

Technical Datasheet

(approx. 0.3Mb)

Pricing

Unfortunately this product has been discontinued and/or is no longer available. Please contact us for details on possible alternative products.

Contact Us About This Product

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Top