-
Lifting Equipment
Browse Lifting Equipment Shop
- Chain Hoists
-
Wire Rope Hoists
- Hand Operated Wire Rope Winches and Hoists
- Cable Pullers / Hoists, Wire Rope Manual Operation
- Electric Winches and Hoists, AC (Mains Powered)
- Scaffold Hoists & Accessories
- Overhead Wire Rope Crane Hoists
- Hydraulic Wire Rope Winches & Hoists
- Pneumatic Wire Rope Air Winches / Hoists (Lifting and Pulling)
- Vehicle Mounted Winches
- Tractel Wire Rope & Accessories
-
General Lifting Equipment
- Fibre Slings
- Chain Slings Assemblies & Components
- Lifting and Lashing Chain
- Wire Rope Slings & Assemblies
- Shackles
- Eyebolts and Eyenuts
- Lifting & Pulling Clamps
- Lifting Beams & Spreader Beams
- Precast Concrete Lifting
- Lifting Magnets, Permanent, Battery Electric and Manual
- Runway Beam Monorail Crane Trolleys, Push, Geared & Electric
- Equipment Identification Tags
-
Rigging Equipment
- Crosby Lifting & Rigging
- Master Ring & Load Suspension Eyes
- Lifting & Rigging Hooks
- Turnbuckles & Rigging Screws
- Wire Rope Accessories and Fittings
- Snatch Blocks, Sheave Blocks and Crane Pulley Blocks
- Load Restraint Equipment
- General Rigging Accessories
- Lifting & Rigging Swivels - Eye, Hook & Shackle
- Pulley Sheaves
-
Cranes & Gantry Systems
- Portable Davit Arms and Jib Cranes
- Swing Jib Cranes - Installed Floor & Wall Cranes
- Portable/Mobile Free-standing Swing Jib Cranes
- Aluminium Gantries
- Steel Gantries
- Fixed Steel Gantry Systems
- Shearlegs, Tripods & Quadpods
- Overhead Crane Systems
- Portable Shop-Floor/Workshop/Garage Cranes
- Counterbalance Floor, Workshop Cranes
- Scaffolding Runway Beam Systems
-
Material Handling & Jacking Equipment
- Machinery & Load Moving Skates
- Hydraulic Cylinders & Pumps
- Lifting Jacks
- Manhole Cover Lifters
- Hydraulic Pull Cylinders
- Hand Operated Pallet Trucks, Pump Trucks
- Stacker Trucks, Materials Lifts, Manual and Electric
- Genie and Counterbalance Materials Lifters
- Scissor Lift Tables
- Drum Handling Equipment
- Crane Forks
- Load Weighing Equipment - Load Cells
- Tool Spring Balancers / Load Balancers
- Platform Trucks & Trolleys
-
Fork Lift Truck Attachments
- Fork Mounted Man Riding Baskets
- Environment & Waste Handling Attachments
- Fork Lift Truck Mounted Drum Handling Attachments
- Fork Mounted Jib and Hook Attachments
- Fork Truck Booms & Tines
- Stainless Steel Forklift Attachments
- Forklift Truck Fork Extensions
- Multi Fork Attachments
- Fork Truck Scoop Attachments
- Big Bag Fork Truck Attachment
- Closed Base Coil Support Attachments
- Forklift Fork Protection Sleeves
- Snow Plough Fork Lift Truck Attachments
- Other Forklift Truck & Telehandler Attachments
- Specialist Lifting Equipment
- Access and Safety Related
- Workshop and Shop Floor
- Screwjacks & Actuators
-
Height Safety
Browse Height Safety Store
-
Fall Arrest and Height Safety Harnesses
- General Use Harnesses EN361
- Work Positioning Harnesses EN361 & EN358
- Rope Access Harnesses
- Rescue Harnesses EN1497 & EN361
- Ladies & Childrens Harnesses
- Hi Vis Jacket/Vest Harnesses
- Welders Harnesses
- ATEX (Anti-Static) Harnesses
- Linesman Harnesses
- Oil Derrick Harnesses
- Sport Climbing Harnesses
- Tree Surgeon Positioning Harnesses
- Sit and Chest Harnesses. EN361 EN356 & EN831
- Work Positioning & Restraint Belts EN358
- Fall Arrest, Restraint and Positioning Lanyards
- Height Safety and Fall Arrest Kits
- Inertia Reels and Retrieval Blocks
- Man-riding Hoists & Rescue Winches
-
Fall Arrest & Man-riding Systems
- Fall Arrest Davit Arms & Posts for Working at Height
- Sala Advanced Davit Arm Systems and Components
- Xtirpa Confined Space Davit Arm Systems and Components
- Abtech Man-riding, Fall Arrest and Rescue Davits and Components
- Man-riding & Rescue Tripods & Quadpods
- Manriding Systems, Baskets and Chairs
- Mobile Fall Arrest Gantries, Systems & Steps
- Rope Guided Fall Arresters (Steel & Synthetic Rope)
- Temporary Horizontal Fall Arrest Lifelines
- Vertical Fall Arrest Systems Permanently Installed
- Horizontal Fall Arrest Systems Permanently Installed
- Manriding Baskets Fork Truck and Overhead Crane
- Tank Side Entry and Vehicle Fall Arrest Systems
- Suspension Seats / Bosuns Chair Working at Height
- Collective Fall Arrest Systems
- Man-Riding Sheave Blocks
- Anchorage Devices
- Karabiners & Connectors
- Rescue, Evacuation & Rope Access
-
General Height Safety Gear
- Height Safety Accessories
- Industrial & Climbing Height Safety Helmets
- Synthetic Height Safety Rope & Anchorage Lines
- Height safety Pulley Wheels For Synthetic & Steel Wire Rope
- Black Height Safety Equipment & PPE
- Hot Work Equipment. Cutting, Grinding & Welding
- Cases, Bags, Backpacks, Holdalls. Height Safety Gear
- Telescopic Extension Pole for Height Safety Applications
- Wind Energy Height Safety Equipment
-
Stainless Steel Fall Arrest Equipment
-
Fall Arrest and Height Safety Harnesses
- Home
- About Us
-
Contact
Get In Touch
- Home/
- Fall Arrest & Height Safety Equipment/
- Fall Arrest Systems & Man-riding Equipment/
- Rope Guided Fall Arresters (Steel & Synthetic Rope)/
- Tractel Rope Guided Fall Arrestors/
- Tractel Stopfor "KSM" (Stopfor "K" with additional safety) Manual Fall Arrestor for Working on Horizontal or Sloping Roofs. Uses 10.5-12.5mm Rope
Tractel Stopfor "KSM" (Stopfor "K" with additional safety) Manual Fall Arrestor for Working on Horizontal or Sloping Roofs. Uses 10.5-12.5mm Rope
stopfor KSM / TSWA-3945
This page has now expired. Please Contact us with your requirements for a superseding model or suitable alternative.
The Stopfor KSM, is the Stopfor K version ensuring correct mounting of the device on the rope, in the proper direction, by its upside-down mounting prevention system integrated in the device and allowing movement along the rope by intentional manual action on the device. Unlike the Stopfor K for which movement along the rope takes place in accordance with the user’s movement, the device, with reinforced cam spring, stays in position on the rope so long as it has not been released by the user.
The Stopfor KSM is made of aluminum. It is light weight, robust, ergonomic and compact. It connects to all the harness fall arrest anchor points, either by a type M10 connector or by a short 30 cm lanyard.
Installation of the rope is fast and easy: after removing the connector, the two side plates are pivoted to open and the rope is placed in position, to close the Stopfor, the two side plates are pivoted in the closing direction and the connector is installed and serves as a safety lock.
The devices of the Stopfor K product line will be replacing the traditional jaw type fall arresters which are heavy and can easily block on descent. The Stopfor K fall arresters provide the user with a new, enhanced level of comfort when circulating on the rope.
With its upside-down mounting prevention system providing enhanced utilization of safety, preventing the user from installing the device upside down on the rope.
It is equipped with a reinforced cam spring and can only be moved along the rope by an intentional manual action of the user, for this reason, it should be recommended for roofers and carpenters working on steeply-sloped roofs, on which the fall arrester allows them to maintain a chosen work position.
All the Stopfor devices of the Stopfor K product line can be used as fall arresters on the Tractel 11 mm or 12.5 mm diameter ropes, in compliance with standard EN 353.2. terrace utilization option.
All the Stopfor devices of the Stopfor K product line can be used as lanyard tensioner-reducer on the Tractel 12.5 mm diameter ropes only, in compliance with standard EN 358.
Technical characteristics
Material : anodized aluminum alloy.
Connector M10 made of dichromate, zinc-plated steel.
Option : polyester 20 cm lanyard + 2 connectors M41 or M42 made of dichromate, zinc-plated steel.
Operates on TRACTEL 11 or 12.5 mm diameter polyamide static rope, sold separately.
Available with connectors:
- M10, M41 and strap or M42 and strap
M10 18mm opening two tone steel manual screw locking | M41 21mm opening two tone steel double trigger auto locking | M42 18mm opening aluminium double trigger auto locking |
This page has now expired. Please Contact us with your requirements for a superseding model or suitable alternative.
The Stopfor KSM, is the Stopfor K version ensuring correct mounting of the device on the rope, in the proper direction, by its upside-down mounting prevention system integrated in the device and allowing movement along the rope by intentional manual action on the device. Unlike the Stopfor K for which movement along the rope takes place in accordance with the user’s movement, the device, with reinforced cam spring, stays in position on the rope so long as it has not been released by the user.
The Stopfor KSM is made of aluminum. It is light weight, robust, ergonomic and compact. It connects to all the harness fall arrest anchor points, either by a type M10 connector or by a short 30 cm lanyard.
Installation of the rope is fast and easy: after removing the connector, the two side plates are pivoted to open and the rope is placed in position, to close the Stopfor, the two side plates are pivoted in the closing direction and the connector is installed and serves as a safety lock.
The devices of the Stopfor K product line will be replacing the traditional jaw type fall arresters which are heavy and can easily block on descent. The Stopfor K fall arresters provide the user with a new, enhanced level of comfort when circulating on the rope.
With its upside-down mounting prevention system providing enhanced utilization of safety, preventing the user from installing the device upside down on the rope.
It is equipped with a reinforced cam spring and can only be moved along the rope by an intentional manual action of the user, for this reason, it should be recommended for roofers and carpenters working on steeply-sloped roofs, on which the fall arrester allows them to maintain a chosen work position.
All the Stopfor devices of the Stopfor K product line can be used as fall arresters on the Tractel 11 mm or 12.5 mm diameter ropes, in compliance with standard EN 353.2. terrace utilization option.
All the Stopfor devices of the Stopfor K product line can be used as lanyard tensioner-reducer on the Tractel 12.5 mm diameter ropes only, in compliance with standard EN 358.
Technical characteristics
Material : anodized aluminum alloy.
Connector M10 made of dichromate, zinc-plated steel.
Option : polyester 20 cm lanyard + 2 connectors M41 or M42 made of dichromate, zinc-plated steel.
Operates on TRACTEL 11 or 12.5 mm diameter polyamide static rope, sold separately.
Available with connectors:
- M10, M41 and strap or M42 and strap
M10 18mm opening two tone steel manual screw locking | M41 21mm opening two tone steel double trigger auto locking | M42 18mm opening aluminium double trigger auto locking |
Pricing
Unfortunately this product has been discontinued and/or is no longer available. Please contact us for details on possible alternative products.
Contact Us About This Product
If you wish to receive a quote for this product, please use the 'Pricing' tab above, this form is for general enquiries regarding this product only.
You can also Request a Quote using the Buy/Quote tab above!
You can easily add more than one item to the Quote Request. This is highly recommend as we will be able to suit your needs much more efficiently.
Share this page!
Save this QR code
for use on Smart Phones