-
Lifting Equipment
Browse Lifting Equipment Shop
- Chain Hoists
-
Wire Rope Hoists
- Hand Operated Wire Rope Winches and Hoists
- Cable Pullers / Hoists, Wire Rope Manual Operation
- Electric Winches and Hoists, AC (Mains Powered)
- Scaffold Hoists & Accessories
- Overhead Wire Rope Crane Hoists
- Hydraulic Wire Rope Winches & Hoists
- Pneumatic Wire Rope Air Winches / Hoists (Lifting and Pulling)
- Vehicle Mounted Winches
- Tractel Wire Rope & Accessories
-
General Lifting Equipment
- Fibre Slings
- Chain Slings Assemblies & Components
- Lifting and Lashing Chain
- Wire Rope Slings & Assemblies
- Shackles
- Eyebolts and Eyenuts
- Lifting & Pulling Clamps
- Lifting Beams & Spreader Beams
- Precast Concrete Lifting
- Lifting Magnets, Permanent, Battery Electric and Manual
- Runway Beam Monorail Crane Trolleys, Push, Geared & Electric
- Equipment Identification Tags
-
Rigging Equipment
- Crosby Lifting & Rigging
- Master Ring & Load Suspension Eyes
- Lifting & Rigging Hooks
- Turnbuckles & Rigging Screws
- Wire Rope Accessories and Fittings
- Snatch Blocks, Sheave Blocks and Crane Pulley Blocks
- Load Restraint Equipment
- General Rigging Accessories
- Lifting & Rigging Swivels - Eye, Hook & Shackle
- Pulley Sheaves
-
Cranes & Gantry Systems
- Portable Davit Arms and Jib Cranes
- Swing Jib Cranes - Installed Floor & Wall Cranes
- Portable/Mobile Free-standing Swing Jib Cranes
- Aluminium Gantries
- Steel Gantries
- Fixed Steel Gantry Systems
- Shearlegs, Tripods & Quadpods
- Overhead Crane Systems
- Portable Shop-Floor/Workshop/Garage Cranes
- Counterbalance Floor, Workshop Cranes
- Scaffolding Runway Beam Systems
-
Material Handling & Jacking Equipment
- Machinery & Load Moving Skates
- Hydraulic Cylinders & Pumps
- Lifting Jacks
- Manhole Cover Lifters
- Hydraulic Pull Cylinders
- Hand Operated Pallet Trucks, Pump Trucks
- Stacker Trucks, Materials Lifts, Manual and Electric
- Genie and Counterbalance Materials Lifters
- Scissor Lift Tables
- Drum Handling Equipment
- Crane Forks
- Load Weighing Equipment - Load Cells
- Tool Spring Balancers / Load Balancers
- Platform Trucks & Trolleys
-
Fork Lift Truck Attachments
- Fork Mounted Man Riding Baskets
- Environment & Waste Handling Attachments
- Fork Lift Truck Mounted Drum Handling Attachments
- Fork Mounted Jib and Hook Attachments
- Fork Truck Booms & Tines
- Stainless Steel Forklift Attachments
- Forklift Truck Fork Extensions
- Multi Fork Attachments
- Fork Truck Scoop Attachments
- Big Bag Fork Truck Attachment
- Closed Base Coil Support Attachments
- Forklift Fork Protection Sleeves
- Snow Plough Fork Lift Truck Attachments
- Other Forklift Truck & Telehandler Attachments
- Specialist Lifting Equipment
- Access and Safety Related
- Workshop and Shop Floor
- Screwjacks & Actuators
-
Height Safety
Browse Height Safety Store
-
Fall Arrest and Height Safety Harnesses
- General Use Harnesses EN361
- Work Positioning Harnesses EN361 & EN358
- Rope Access Harnesses
- Rescue Harnesses EN1497 & EN361
- Ladies & Childrens Harnesses
- Hi Vis Jacket/Vest Harnesses
- Welders Harnesses
- ATEX (Anti-Static) Harnesses
- Linesman Harnesses
- Oil Derrick Harnesses
- Sport Climbing Harnesses
- Tree Surgeon Positioning Harnesses
- Sit and Chest Harnesses. EN361 EN356 & EN831
- Work Positioning & Restraint Belts EN358
- Fall Arrest, Restraint and Positioning Lanyards
- Height Safety and Fall Arrest Kits
- Inertia Reels and Retrieval Blocks
- Man-riding Hoists & Rescue Winches
-
Fall Arrest & Man-riding Systems
- Fall Arrest Davit Arms & Posts for Working at Height
- Sala Advanced Davit Arm Systems and Components
- Xtirpa Confined Space Davit Arm Systems and Components
- Abtech Man-riding, Fall Arrest and Rescue Davits and Components
- Man-riding & Rescue Tripods & Quadpods
- Manriding Systems, Baskets and Chairs
- Mobile Fall Arrest Gantries, Systems & Steps
- Rope Guided Fall Arresters (Steel & Synthetic Rope)
- Temporary Horizontal Fall Arrest Lifelines
- Vertical Fall Arrest Systems Permanently Installed
- Horizontal Fall Arrest Systems Permanently Installed
- Manriding Baskets Fork Truck and Overhead Crane
- Tank Side Entry and Vehicle Fall Arrest Systems
- Suspension Seats / Bosuns Chair Working at Height
- Collective Fall Arrest Systems
- Man-Riding Sheave Blocks
- Anchorage Devices
- Karabiners & Connectors
- Rescue, Evacuation & Rope Access
-
General Height Safety Gear
- Height Safety Accessories
- Industrial & Climbing Height Safety Helmets
- Synthetic Height Safety Rope & Anchorage Lines
- Height safety Pulley Wheels For Synthetic & Steel Wire Rope
- Black Height Safety Equipment & PPE
- Hot Work Equipment. Cutting, Grinding & Welding
- Cases, Bags, Backpacks, Holdalls. Height Safety Gear
- Telescopic Extension Pole for Height Safety Applications
- Wind Energy Height Safety Equipment
-
Stainless Steel Fall Arrest Equipment
-
Fall Arrest and Height Safety Harnesses
- Home
- About Us
-
Contact
Get In Touch
- Home/
- Fall Arrest & Height Safety Equipment/
- Harnesses for Fall Arrest & Height Safety/
- Linesman Fall Arrest Harnesses (Electric Pylon)/
- Tractel "HT Electra" Lineman Harness with Rear 'D' Ring & Front Webbing Loops. With Work Positioning Belt
Tractel "HT Electra" Lineman Harness with Rear 'D' Ring & Front Webbing Loops. With Work Positioning Belt
Semi Flotation of approx 110°, 6 adjustment points and 3 adjustable buckles
HT electra / TELH-3868
Unfortunately this harness has now been discontinued and superseded by a new model of the Electra Harness.
The Electra 2002 linemans harness designed for professionals carrying out at height work on masts with positioning practices (EN 361, EN 358).
The Electra 2002 harness, as its name implies, is designed around pole strap to work in the fields of utilities and telecom companies.
The first requirement for a harness is to hold the user in the event of a fall, without causing any serious injury.
The harness is comfortable and easy to wear.
The following design criteria meet these requirements :
- Automatic buckles on both waist and legs make the Electra easy to fit and quick to adjust.
- Quick fitting adjustment of the shoulder strap by a simple traction on quick fitting buckles.
- High comfort waist belt with abrasion resistant outer liner; the work positioning strap with elasticised retainers offers good control of the waist belt when the user is rotating.
- Shoulder straps with shoulder pads for more comfort.
- Gear rucking with a resistance of 100 kg is designed with the belt for easy reach.
The Electra 2002 Linemans Harness has 3 anchorage points :
- A1 : a metal “D ring” back anchorage point for attaching a fall arrester like Stopfor or Blocfor.
- A2 : a webbing loop chest anchorage point for attaching a fall arrester.
- A3 : two side anchorage points for attaching pole straps.
Specifications
- Blue polyamide webbing : 45 mm width.
- Belt in thermoformed foam covered with cordura fabric.
- Back anchorage point “D ring”.
- Gear racking.
- Shoulder pad.
- Weight : 1,520kg.
- CE type examination certificate : APAVE : 0082/352/160/03/03/0054.
- Complies with standard EN 361 and EN 358.
Equipment used with the Electra Harness:
- Anchorage (EN 795).
- Carabiners (EN 362).
- Pole strap (EN 358).
- Lanyard with energy absorber (EN 355).
- Retractable lifeline (EN 360).
- Components in fall arrest system (EN 353-1, EN 353-2).
TheElectra 2002 harness designed for professionals carrying out at height work on masts with positioning practices (EN 361, EN 358). As its name implies, the Electra harness is designed around pole strap to work in the fields of utilities and telecom companies.
Description
The first requirement for a harness is to hold the user in the event of a fall, without causing any serious injury.
A secondary requirement is that the harness is confortable and easy to wear.
The following design criteria meet this requirement :
- automatic buckles (2) on both waist and legs make the Electra easy to fit and quick to adjust.
- quick fitting adjustable of the shoulder strap by a simple traction on quick fitting buckles. (3)
- high comfort waist belt (4) with abrasion resistant outer liner ; the work positioning strap with
- elasticised retainers offers good control of the waist belt when the user is rotating ;
- shoulder straps with shoulder pads (5) for more comfort ;
- Gear rucking (6) with a resistance of 100 kg is designed with the belt for easy reach.
The Electra 2002 harness has 3 anchorage points :
- A1 : a metal “D ring” back anchorage point for attaching a fall arrester like Stopfor or Blocfor,
- A2 : a webbing loop chest anchorage point for attaching a fall arrester ;
- A3 : two side anchorage points for attaching pole straps.
Operation
Inspection before use
Visually check the condition of the harness, straps, stitching and loops. The strap and stitch threads must not show any signs of abrasion, fraying, burns or cuts. The adjustment devices and loops must not show any signs of corrosion or deformation and should
operate correctly. If you have any doubt, immediately remove the product from circulation.
- Check the state of the harness and connector attachments.
- Check the complete fall arrester system.
Functions
The HT harness are intended to create an anchorage point on the operator to form a fall-arrest system to protect him against a fall when performing work at heights. A fall-arrest harness is the only device which can be worn on a body in a fall-arrest system.
Depending on the type of harness, there are several possible uses :
- Harness with back anchorage point: fall-arrest safety for working at heights,
- Harness with back and chest anchorage point: same harness with back anchorage point + work positioning, safety when climbing ladder,…
- Harness with belt anchorage point: fall-arrest safety according to type and anchorage points available, belt anchorage point for work positioning. In a work positioning system, the lanyard must be maintained tensioned and freedom movement must belimited to 0.6 m maximum.
- Harness with stomach anchorage point: fall-arrest safety according to type of anchorage points available; stomachanchorage point for work in suspended position.
Specification
- Blue polyamide webbing : 45 mm width.
- Belt in thermoformed foam covered with cordura fabric (4).
- Back anchorage point “D ring”
- Gear racking (6).
- Shoulder pad (5).
- Weight : 1,520Kg.
- CE type examination certificate :
- APAVE : 0082/352/160/03/03/0054
- Complies with standard EN 361 and EN 358
Unfortunately this harness has now been discontinued and superseded by a new model of the Electra Harness.
The Electra 2002 linemans harness designed for professionals carrying out at height work on masts with positioning practices (EN 361, EN 358).
The Electra 2002 harness, as its name implies, is designed around pole strap to work in the fields of utilities and telecom companies.
The first requirement for a harness is to hold the user in the event of a fall, without causing any serious injury.
The harness is comfortable and easy to wear.
The following design criteria meet these requirements :
- Automatic buckles on both waist and legs make the Electra easy to fit and quick to adjust.
- Quick fitting adjustment of the shoulder strap by a simple traction on quick fitting buckles.
- High comfort waist belt with abrasion resistant outer liner; the work positioning strap with elasticised retainers offers good control of the waist belt when the user is rotating.
- Shoulder straps with shoulder pads for more comfort.
- Gear rucking with a resistance of 100 kg is designed with the belt for easy reach.
The Electra 2002 Linemans Harness has 3 anchorage points :
- A1 : a metal “D ring” back anchorage point for attaching a fall arrester like Stopfor or Blocfor.
- A2 : a webbing loop chest anchorage point for attaching a fall arrester.
- A3 : two side anchorage points for attaching pole straps.
Specifications
- Blue polyamide webbing : 45 mm width.
- Belt in thermoformed foam covered with cordura fabric.
- Back anchorage point “D ring”.
- Gear racking.
- Shoulder pad.
- Weight : 1,520kg.
- CE type examination certificate : APAVE : 0082/352/160/03/03/0054.
- Complies with standard EN 361 and EN 358.
Equipment used with the Electra Harness:
- Anchorage (EN 795).
- Carabiners (EN 362).
- Pole strap (EN 358).
- Lanyard with energy absorber (EN 355).
- Retractable lifeline (EN 360).
- Components in fall arrest system (EN 353-1, EN 353-2).
TheElectra 2002 harness designed for professionals carrying out at height work on masts with positioning practices (EN 361, EN 358). As its name implies, the Electra harness is designed around pole strap to work in the fields of utilities and telecom companies.
Description
The first requirement for a harness is to hold the user in the event of a fall, without causing any serious injury.
A secondary requirement is that the harness is confortable and easy to wear.
The following design criteria meet this requirement :
- automatic buckles (2) on both waist and legs make the Electra easy to fit and quick to adjust.
- quick fitting adjustable of the shoulder strap by a simple traction on quick fitting buckles. (3)
- high comfort waist belt (4) with abrasion resistant outer liner ; the work positioning strap with
- elasticised retainers offers good control of the waist belt when the user is rotating ;
- shoulder straps with shoulder pads (5) for more comfort ;
- Gear rucking (6) with a resistance of 100 kg is designed with the belt for easy reach.
The Electra 2002 harness has 3 anchorage points :
- A1 : a metal “D ring” back anchorage point for attaching a fall arrester like Stopfor or Blocfor,
- A2 : a webbing loop chest anchorage point for attaching a fall arrester ;
- A3 : two side anchorage points for attaching pole straps.
Operation
Inspection before use
Visually check the condition of the harness, straps, stitching and loops. The strap and stitch threads must not show any signs of abrasion, fraying, burns or cuts. The adjustment devices and loops must not show any signs of corrosion or deformation and should
operate correctly. If you have any doubt, immediately remove the product from circulation.
- Check the state of the harness and connector attachments.
- Check the complete fall arrester system.
Functions
The HT harness are intended to create an anchorage point on the operator to form a fall-arrest system to protect him against a fall when performing work at heights. A fall-arrest harness is the only device which can be worn on a body in a fall-arrest system.
Depending on the type of harness, there are several possible uses :
- Harness with back anchorage point: fall-arrest safety for working at heights,
- Harness with back and chest anchorage point: same harness with back anchorage point + work positioning, safety when climbing ladder,…
- Harness with belt anchorage point: fall-arrest safety according to type and anchorage points available, belt anchorage point for work positioning. In a work positioning system, the lanyard must be maintained tensioned and freedom movement must belimited to 0.6 m maximum.
- Harness with stomach anchorage point: fall-arrest safety according to type of anchorage points available; stomachanchorage point for work in suspended position.
Specification
- Blue polyamide webbing : 45 mm width.
- Belt in thermoformed foam covered with cordura fabric (4).
- Back anchorage point “D ring”
- Gear racking (6).
- Shoulder pad (5).
- Weight : 1,520Kg.
- CE type examination certificate :
- APAVE : 0082/352/160/03/03/0054
- Complies with standard EN 361 and EN 358
Pricing
Unfortunately this product has been discontinued and/or is no longer available. Please contact us for details on possible alternative products.
Contact Us About This Product
If you wish to receive a quote for this product, please use the 'Pricing' tab above, this form is for general enquiries regarding this product only.
You can also Request a Quote using the Buy/Quote tab above!
You can easily add more than one item to the Quote Request. This is highly recommend as we will be able to suit your needs much more efficiently.
Share this page!
Save this QR code
for use on Smart Phones