Quick Ref: RVLR-3657
Showing 9 of 10

RUD VWBG Swivel Load Ring - Range from 300kg - 40000kg - M8 to M100

Model:  RUD VWBG / VWBG-V / RVLR-3657

RUD VWBG Swivel Load RingDimensional Drawing
RUD WVBG Swivel Load Ring

All dimensions shown are approximate. Please confirm at time of order.

Thread Length
Part N° Article No. Nominal WLL Thread a (mm) b (mm) t (mm) c (mm) d (mm) e (mm) f (mm) g (mm) k (mm) Weight (kg) Unit Price Quantity
3657-T23115
VWBG 0.3-M8
7103720 300kg M8 TBC TBC TBC 12 TBC TBC TBC TBC TBC TBC £  71.37
3657-T23116
VWBG 0.45-M10
7103715 450kg M10 TBC TBC TBC 17 TBC TBC TBC TBC TBC TBC £  75.39
3657-T8070
VWBG 0,6-M12
7100180 600kg M12 10 49 107 35 42 36 21 47 - 0.41 £  80.07
3657-T8071
VWBG 1,0-M14
8600337 1000kg M14 13 46 114 38 48 41 21 56 - 0.63 £  161.22
3657-T8072
VWBG 1,3-M16
7100430 1300kg M16 13 46 114 38 48 41 25 56 - 0.59 £  85.83
3657-T8073
VWBG 1,8-M18
8600338 1800kg M18 13 54 137 35 64 55 27 67 - 1.18 £  174.14
3657-T8074
VWBG 2,0-M20
7100800 2000kg M20 13 54 137 35 64 55 33 67 - 1.42 £  144.21
3657-T8075
VWBG 2,0-M22
8600334 2000kg M22 13 54 137 35 62 55 33 67 - 1.45 £  202.46
3657-T8076
VWBG 3,5-M24
7100640 3500kg M24 18 66 173 40 81 70 40 88 - 2.63 £  193.75
3657-T8077
VWBG 3,5-M27
8600335 3500kg M27 18 66 173 40 81 70 41 88 - 2.65 £  421.79
3657-T8078
VWBG 5,0-M30
7100650 5000kg M30 22 90 221 50 99 85 50 106 - 5.09 £  258.56
3657-T8079
VWBG 6(7.5)t-M33
8600150 6000kg M33 23 86 208 50 90 80 50 96 80 5.6 Quote Required
3657-T8080
VWBG 8(10)t-M36
7999059 8000kg M36 22 86 208 50 90 - 54 94 80 4.67 £  378.94
3657-T8081
VWBG 12(13)t-M42
7999044 12000kg M42 26 111 234 65 98 - 63 95 85 6.1 £  413.62
3657-T8082
VWBG 12(15)t-M45
7900455 12000kg M45 26 111 234 65 98 - 67 95 85 6.24 £  501.72
3657-T8083
VWBG 13(16)t-M48
7999045 13000kg M48 26 111 234 65 98 - 68 95 85 6.37 £  459.14
3657-T8084
VWBG 14(20)t-M52
7901081 14000kg M52 32 119 271 70 120 - 78 120 95 10.55 £  501.72
3657-T8085
VWBG 16(22)t-M56
7999004 16000kg M56 32 119 271 70 120 - 84 120 95 10.68 £  555.15
3657-T8086
VWBG 16(22)t-M60
8600454 16000kg M60 32 119 271 70 120 - 90 120 95 11.37 Quote Required
3657-T8087
VWBG 16(25)t-M64
7999043 16000kg M64 32 119 274 70 120 - 94 120 95 11.4 £  657.98
3657-T8088
VWBG 31,5(40)t-M72
7900097 31500kg M72 46 130 338 90 170 - 108 159 145 29.96 £  2811.10
3657-T8089
VWBG 35(48)t-M80
7900100 35000kg M80 46 130 338 90 170 - 120 159 145 31.19 £  2832.92
3657-T8090
VWBG 40(50)t-M90
7995545 40000kg M90 46 130 338 90 170 - 135 159 145 33.16 £  2883.00
3657-T8091
VWBG 40(50)t-M100
8600157 40000kg M100 46 130 338 90 170 - 150 159 145 35.13 Quote Required
Add to Quote Basket   ?  

RUD load ring suitable for all loading in any direction. Swivels 360 degrees, pivots 180 degrees. Dimensions approximate.

RUD Load Ring

Special threads available upon request.

Suitable for all loads which swivel and tilt. Can be loaded in all directions with a 4 : 1 design factor.

Swiveling under full load is permissible provided the inclination angle is not perpendicular to the screw - in direction.

Not suitable for permanent swiveling under full load. Suitable for through bores. Easy assembly due to the single threaded tapping. High tensile, inspected suspension ring according to EN 1677 or DIN 5688-8.

The surface is pink powder coated and zinc plated.

Choose the attachment points in such a way that the introduced forces are accomodated by the work piece without being deformed. Make sure the bolting surface is plain. Ensure an appropriate bore depth to facilitate an optimal sitting of the engaging surface. Work piece material, at least 1.0037 (St 37).
For light metals, nonferrous heavy metals and grey cast iron, the thread type allocation must be done in such a way that, the WLL of the thread type fulfils the requirements of the respective work piece.

Owing to the presence of the ball bearing, in case of a single transportation procedure, fastening with a flat wrench according to DIN 895 or DIN 894 without using an extension is enough. Without a washer, the seat - engaging surface of the VWBG-V (D) must completely and evenly lie onto the surface of the work piece. Is the VWBG-V to be permanently loaded, it must be tightened with the correct torque.

When impact loaded or operated in environments with skewing and vibrations, unintentional loosening can happen, especially if through bolts with nuts are used.

Securing possibilities: Use of a liquid thread securing medium eg. Loctite ( follow the manufacturer´s recomendations) or positive bolt securing for example using a castellated nut with a split pin, counter nut etc.

Proof Testing

There is no requirement to Proof Test RUD Products, either Bolt or Weldable after Installation if the user instructions for welding are carried out correctly. The welding should be carried out by a suitably qualified and competent welder/person.

The supporting structure, or the load, should be of adequate strength to take the stresses involved and this is the responsibility of the engineering designer or equivalent.

RUD Lifting and Lashing Products are Manufactured and conform to EN 1677. No further Proof Testing in the field is required. In fact it would be considered that the Product had been overloaded if a Load more than the recommended Working Load Limit had been applied.

RUD products should be regularly inspected in line with the requirements of LOLER and as per our user instructions at intervals decided by a competent person.

Specifications

All dimensions shown are approximate. Please confirm at time of order.

Model Article No. Nominal WLL torque Thread Dimensional Drawing Approximate Dimensions (mm) Weight (kg)
a b t c d e f g k
VWBG 0,3-M8 7103720 300kg 10 M8 RUD dimensional drawing 8 31 76 29 30 28 13 36 - 0.18
VWBG-V 0,3-M8 8600330 13-102 0.29
VWBG 0,45-M10 7103715 450kg 10 M10 8 31 78 29 36 30 17 38 - 0.29
VWBG-V 0,45-M10 8600331 17-122 0.38
VWBG 0,6-M12 7100180 600kg 10 M12 10 49 107 35 42 36 21 47 - 0.41
VWBG-V 0,6-M12 8600332 21-140
0.61
VWBG 1,0-M14 8600337 1000kg 25 M14 13 46 114 38 48 41 21 56 - 0.63
VWBG-V 1,0-M14 8600337
 21-65 0.20
VWBG 1,3-M16 7100430 1300kg 30 M16 13 46 114 38 48 41 25 56 - 0.59
VWBG-V 1,3-M16 8600333
16-180
 0.89
VWBG 1,8-M18 8600338 1800kg 50 M18 13 54 137 35 64 55 27 67 - 1.18
VWBG-V 1,8-M18 8600338
18-83 1.10
VWBG 2,0-M20 7100800 2000kg 70 M20 13 54 137 35 64 55 33 67 - 1.42
VWBG-V 2,0-M20 8600334
20-223
 1,81
VWBG 2,0-M22 8600334 2000kg 100 M22 13 54 137 35 62 55 33 67 - 1.45
VWBG-V 2,0-M22 8600334
-
1,45
VWBG 3,5-M24 7100640 3500kg 150 M24 18 66 173 40 81 70 40 88 - 2.63
VWBG-V 3,5-M24 8600335
24-255
3.50
VWBG 3,5-M27 8600335 3500kg 200 M27 18 66 173 40 81 70 41 88 - 2.65
VWBG-V 3,5-M27  8600339  27-92  2.93
VWBG 5,0-M30 7100650 5000kg 225 M30 22 90 221 50 99 85 50 106 - 5.09
VWBG-V 5,0-M30 8600336 30-330 7.00
VWBG 6(7.5)t-M33 8600150 6000kg 350 M33 23 86 208 50 90 80 50 96 80 5.60
VWBG 8(10)t-M36 7999059 8000kg 410 M36 22 86 208 50 90 - 54 94 80 4.67
VWBG 12(13)t-M42 7999044 12000kg 550 M42 26 111 234 65 98 - 63 95 85 6.10
VWBG 12(15)t-M45 7900455 12000kg 550 M45 26 111 234 65 98 - 67 95 85 6.24
VWBG 13(16)t-M48 7999045 13000kg 550 M48 26 111 234 65 98 - 68 95 85 6.37
VWBG 14(20)t-M52 7901081 14000kg 750 M52 32 119 271 70 120 - 78 120 95 10.55
VWBG 16(22)t-M56 7999004 16000kg 800 M56 32 119 271 70 120 - 84 120 95 10.68
VWBG 16(22)t-M60 8600454 16000kg 800 M60 32 119 271 70 120 - 90 120 95 11.37
VWBG 16(25)t-M64 7999043 16000kg 800 M64 32 119 274 70 120 - 94 120 95 11.40
VWBG 31,5(40)t-M72 7900097 31500kg 1200 M72 46 130 338 90 170 - 108 159 145 29.96
VWBG 35(48)t-M80 7900100 35000kg 1500 M80 46 130 338 90 170 - 120 159 145 31.19
VWBG 40(50)t-M90 7995545 40000kg 2000 M90 46 130 338 90 170 - 135 159 145 33.16
VWBG 40(50)t-M100 8600157 40000kg 2000 M100 46 130 338 90 170 - 150 159 145 35.13
vwbg-swivel-load-rings.pdf

VWBG Product Datasheet

(approx. 1.4Mb)

Contact Us About This Product

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Top