Protecta "Pro Stretch" Elasticated Energy Absorbing Fall Arrest Lanyard. Karabiners, Scaffold Hooks and Snap Hooks - Range 1.5m 1.75m & 2 Metre

Energy absorption over entire length means a better balanced lanyard, with no bulky energy absorber to weigh down the user. The Lanyard is also elasticated over its length to retain the maximum desired length, but doesn’t trail on the ground or get in the way.

Including a protective Velcro cover for the product CE labels, avoiding labels getting pulled off or effaced by abrasion.
Various connectors are available depending on the needs of the user, from standard karabiners to large opening aluminium scaffold hooks.

Including a protective Velcro cover for the product CE labels, avoiding labels getting pulled off or effaced by abrasion. Various connectors are
available depending on the needs of the user, from standard karabiners to large opening aluminium scaffold hooks.

The built in Activation Indicator is very simple to read and understand. The Green “OK” indicates the energy absorber has not been deployed, where as the red ”!” indicates the energy absorber has been deployed. In this case lanyard must removed from service and not be used anymore. The main function of this is to allow the user to instantly see if its energy absorber has been deployed or not. It is also an aid to the person performing the annual inspection.

Specifications

• Lanyard Webbing: 100% Polyester, width - 50mm, minimum breaking load >30kN •

• Absorbing Webbing: 100% Polyester, width - 23mm, activation load >2kN, absorption level (EN355) <6Kn • Thread: 100% Polyester.
• Connectors: Type AJ501, steel, clear zinc plating, 17mm opening - Type AJ565, steel, clear zinc plating, 17mm opening - Type AJ595, steel, clear zinc plating, 50mm opening - Type AJ527, aluminium body, stainless steel closing, 60mm opening •

• Weight (approx): See table above
• Standards: Energy absorber CE certified to EN355, connectors EN362

Pro stretch energy absorbing lanyard models

Safety Information

Protective velcro label cover	Deployed absorber activation indicator ''!''	Undeployed absorber activation indicator ''ok''

The built in Activation Indicator is very simple to read and understand. The Green “OK” indicates the energy absorber has not been deployed, where as the red ”!” indicates the energy absorber has been deployed. In this case lanyard must removed from service and not be used anymore. The main function of this is to allow the user to instantly see if its energy absorber has been deployed or not. It is also an aid to the person performing the annual inspection.