Crosby S506 National Swage Duplex Swage Sleeves - Range Available from 8mm to 32mm
Model: Crosby S-506 / NDSS-2370
National Swage Duplex Sleeves - COLD TUFF Duplex Non-Tapered Sleeves.
"Cold Tuff " for better swageability, made of Special processed low carbon steel which Resists cracking when swaged (equals or exceeds stainless steel sleeves).- For turnback wire rope splicing.
- Turnback terminations have efficiency ratings of 94% based on the catalog strength of wire rope.
- Designed for lower temperature toughness.
- Stamp for identification after swaging without concern for fractures (as per directions in National Swaging Brochure).
| Important Note |
|---|
| S-506 Duplex sleeves are recommended for use with 6 x 19 or 6 x 37, IPS or XIP (EIP), RRL, FC or IWRC wire rope. Before using any National Swage fitting with any other type lay, construction or grade of wire rope, it is recommended that the termination be destructive tested and documented to prove the adequacy of the assembly to be manufactured. |
Metric Table
| S-506 Steel Duplex Non-Tapered Sleeve Specifications | Press / Die Data | ||||||||||
| SN s5 0 6 S-506 Stock No. | Rope Size | Weight per 100 (kg) | Pkg. Qty. | Before Swage Dimensions (mm) | Max. After Swage Dimensions (mm) | Die Desc. | Stock No. 500 Ton 1000 Ton 1500 Ton 5 x 7 | ||||
| (mm) | (in.) | A | B | C | D | ||||||
| 1039334 | 8 | 5/16 | 7.71 | 200 | 31.8 | 26.9 | 20.6 | 4.85 | 19.6 | 3/8 1st Stage | 1192364 |
| 1039352 | 9-10 | 3/8 | 5.90 | 100 | 31.8 | 28.4 | 20.6 | 3.55 | 19.6 | 3/8 1st Stage | 1192364 |
| 1039370 | 11 | 7/16 | 14.1 | 50 | 41.4 | 35.8 | 25.9 | 4.85 | 26.2 | 1/2 1st Stage | 1192408 |
| 1039398 | 13 | 1/2 | 12.2 | 50 | 41.4 | 36.6 | 25.9 | 4.05 | 26.2 | 1/2 1st Stage | 1192408 |
| 1039414 | 14 | 9/16 | 28.6 | 25 | 57.0 | 43.7 | 31.2 | 5.85 | 32.8 | 5/8 1st Stage | 1192444 |
| 1039432 | 16 | 5/8 | 24.5 | 25 | 57.0 | 46.7 | 32.5 | 5.10 | 32.8 | 5/8 1st Stage | 1192444 |
| 1039450 | 18-20 | 3/4 | 41.3 | 10 | 67.0 | 55.0 | 38.6 | 5.85 | 39.4 | 3/4 1st Stage | 1192462 |
| 1039478 | 22 | 7/8 | 57 | 10 | 73.0 | 63.5 | 44.5 | 6.85 | 45.7 | 7/8 1st Stage | 1192480 |
| 1039496 | 25-26 | 1 | 85 | 10 | 77.5 | 72.0 | 51.0 | 8.40 | 52.0 | 1 1st Stage | 1192505 |
| 1039539 | 30-32 | 1-1/4 | 174 | Bulk | 103 | 89.0 | 63.5 | 9.65 | 65.0 | 1-3/8 socket | 1193023 |
Imperial Table
| S-506 Steel Duplex Non-Tapered Sleeve Specifications | Press/Die Data | |||||||||
|
S-506 Stock No. |
Rope Size (in.) | Weight per 100 Pcs. (lbs.) |
Pkg. Qty. | Before Swage Dimensions | Max. After Swage Dimensions (in.) |
Die Desc. | Stock No. 500 Ton 1000 Ton 1500 Ton 5 x 7 |
|||
| A | B | C | D | |||||||
| 1039334 | 5/16 | 17 | 200 | 1.25 | 1.06 | .81 | .19 | .77 | 3/8 1st Stage | 1192364 |
| 1039352 | 3/8 | 13 | 100 | 1.25 | 1.12 | .81 | .14 | .77 | 3/8 1st Stage | 1192364 |
| 1039370 | 7/16 | 31 | 50 | 1.63 | 1.41 | 1.02 | .19 | 1.03 | 1/2 1st Stage | 1192408 |
| 1039398 | 1/2 | 27 | 50 | 1.63 | 1.44 | 1.02 | .16 | 1.03 | 1/2 1st Stage | 1192408 |
| 1039414 | 9/16 | 63 | 25 | 2.25 | 1.72 | 1.23 | .23 | 1.29 | 5/8 1st Stage | 1192444 |
| 1039432 | 5/8 | 54 | 25 | 2.25 | 1.84 | 1.28 | .20 | 1.29 | 5/8 1st Stage | 1192444 |
| 1039450 | 3/4 | 91 | 10 | 2.63 | 2.16 | 1.52 | .23 | 1.55 | 3/4 1st Stage | 1192462 |
| 1039478 | 7/8 | 126 | 10 | 2.88 | 2.50 | 1.75 | .27 | 1.80 | 7/8 1st Stage | 1192480 |
| 1039496 | 1 | 187 | 10 | 3.06 | 2.84 | 2.00 | .33 | 2.05 | 1 1st Stage | 1192505 |
| 1039539 | 1-1/4 | 384 | Bulk | 4.06 | 3.50 | 2.50 | .38 | 2.56 | 1-3/8 Socket | 1193023 |
As advertised in Crosby General Catalogue 2009 Page 45, and previously in Crosby General Catalogue 2006 Page 41.
NOTE: Pricing and specifications may be subject to change without notice. Prices shown may be UK only prices and therefore export pricing may vary dependant on location.
Images are for display purposes only.
Images are for display purposes only.
