Crosby 'G402' Forged Oval Eye Chain Swivel, WLL Range from 1630kg to 20,500kg

Meets the performance requirements of Federal Specification RR-C-271F, Type VII, Class 1, except for those  provisions required of the contractor.

• Hot dip Galvanized.
• Quenched & Tempered.
• Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements.  Importantly, Crosby products meet other critical performance requirements, including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.

Important Note: Crosby 401, 402 and 403 swivels are positioning devices and are not intended to rotate under load.  For load swivels see pages 136-140. Use in corrosive environment requires shank and nut inspection in accordance with ASME B30.10-1.10.4(b)(5)(c)2009.

Metric Dimensions & Specifications

Size (mm)	Size (in.)	G-402 Stock No.	Working Load Limit (t)*	Weight (kg)	Dimensions (mm)
					A	B	C	D	J	M	R	S
13	1/2	1016073	1.63	.60	63.5	33.3	38.1	51.0	33.3	16.0	138	81.0
16	5/8	1016091	2.36	1.13	76.0	39.5	44.5	60.5	38.1	19.1	167	98.5
19	3/4	1016117	3.27	1.82	89.0	44.5	51.0	67.0	47.8	22.4	183	109
22	7/8	1016135	4.54	2.83	102	52.0	57.0	77.5	54.0	25.4	213	127
25	1	1016153	5.67	4.06	114	58.5	63.5	89.0	60.5	28.7	245	146
32	1-1/4	1016199	8.16	7.42	143	68.5	79.5	93.5	76.0	38.1	291	172
38+	1-1/2	1016215	20.5	20.8	180	98.5	104	98.5	95.2	57.0	424	252

*Ultimate Load is 5 times the Working Load Limit. + Manufactured with two 38mm bails connected by a stud with a nut on each side.