Quick Ref: CSH-2394
Showing 1 of 4

Crosby S-319 Shank Hooks with Optional Safety Latch - Range from 500kg to 300000kg

Model:  Crosby S- 319 / CSH-2394

S-319 Shank Hook With Latch
S-319 Shank Hook No Latch
S-319 Shank Hook With Latch S-319 Shank Hook No Latch
Type
Part N° Working Load Limit (t)* Hook ID Code Shank Length Weight Each (kg) Guide Price Quantity
2394-T779
1028505
3/4 D Std. 0.23 £  5.75
2394-T780
1028514
1 F Std. 0.34 £  6.16
2394-T781
1028523
1.6 G Std. 0.45 £  7.68
2394-T782
1028532
2 H Std. 0.83 £  13.20
2394-T783
1028541
3.2 I Std. 1.67 £  20.50
2394-T784
1028550
5 J Std. 3.29 £  41.50
2394-T785
1028563
7.5 K Std. 6.12 £  75.40
2394-T786
1028572
10 L Std. 8.16 Quote Required
2394-T787
1028581
15 N Std. 16 Quote Required
2394-T788
1024386
20 O Std. 32.7 £  803.00
2394-T789
1024402
20 O Long 38.8 Quote Required
2394-T790
1024420
25 P Std. 61 Quote Required
2394-T791
1024448
25 P Long 78 Quote Required
2394-T792
1024466
30 S Std. 83 Quote Required
2394-T793
1024484
30 S Long 97 Quote Required
2394-T794
1024509
40 T Std. 122 Quote Required
2394-T795
1024545
40 T Long 142 Quote Required
2394-T796
1024563
50 U Std. 177 Quote Required
2394-T797
1024581
50 U Long 193 Quote Required
Add to Quote Basket   ?  

Crosby Hoist Shank Hooks.

S319 Shank Hook With Latch
S319 Shank Hook No Latch

The Crosby S319 Hoist Shank Hooks from 500kg to 75 tonnes incorporate markings forges into the product which address two (2) QUIC-CHECK features. They are supplied designed with deformation Indicators -- Two strategically placed marks, one just below the shank or eye and the other on the hook up, which allows for a QUIC-CHECK measurement to determine if the throat opening has changed, thus indicating abuse or overload.

  • To check, use a measuring device (i.e. tape measure) to measure the distance between the marks. The marks should align to either an inch or half-inch increment on the measuring device. If the measurement does not meet this criteria, the hook should be inspected further for possible damage.
  • Angle Indicators -- Indicates the maximum included angle allowed between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two sling legs.
  • Chemical analysis and tensile tests performed on each PIC to verify chemistry and mechanical properties.
  • Patented trademark indicates QUIC-CHECK product.

Hook I.D. Codes

  • A - Alloy Steel
  • B - Bronze High Strength
  • C - Carbon Steel.

Metric Specifications

See imperial tab above for imperial specifications.

Working Load Limit (t)* Hook ID Code Shank Hooks Stock No. Shank Length Weight Each (kg) Rep. Latch Kits
Carbon Alloy Bronze Carbon S-319C S-319CN Alloy S-319A S-319AN Bronze S-319BN S-4320 Stock No. PL Stock No. SS-4055 Stock No.
3/4 1.25 .5 †D 1028505 1028701 1028900 Std. .23 1096325 - -
1 1.6 .6 †F 1028514 1028710 1028909 Std. .34 1096374 - -
1.6 2.5 1 †G 1028523 1028723 1028918 Std. .45 1096421 - -
2 3.2 1.4 †H 1028532 1028732 1028927 Std. .83 1096468 - -
3.2 5.4 2 †I 1028541 1028741 1028936 Std. 1.67 1096515 1092000 -
5 8 3.5 †J 1028550 1028750 1028945 Std. 3.29 1096562 1092001 -
7.5 11.5 5 †K 1028563 1028765 1028954 Std. 6.12 1096609 1092002 -
10 16 6.5 †L 1028572 1028774 1028963 Std. 8.16 1096657 1092003 -
15 22 10 †N 1028581 1028783 1028972 Std. 16.0 1096704 1092004 -
20 30 - O 1024386 1024803 - Std. 32.7 - 1093716 1090161
20 30 - O 1024402 1024821 - Long 38.8 - 1093716 1090161
25 37 - P 1024420 1024849 - Std. 61 - 1093717 1090189
25 37 - P 1024448 1024867 - Long 78 - 1093717 1090189
30 45 - S 1024466 1024885 - Std. 83 - 1093718 1090189
30 45 - S 1024484 1024901 - Long 97 - 1093718 1090189
40 60 - T 1024509 1024929 - Std. 122 - 1093719 1090205
40 60 - T 1024545 1024965 - Long 142 - 1093719 1090205
50 75 - U 1024563 1024983 - Std. 177 - 1093720 -
50 75 - U 1024581 1025009 - Long 193 - 1093720 -
- 100 - W  - -
 -  - -
-
 - -

Dimensions

Dimensional Drawing
Hook ID Code Dimensions (in.)
D F G H J K L M O O2†† P R T T2†† X* Y Z AA
D 2.86 1.25 0.73 0.81 0.93 0.63 5.14 0.63 .93† - 1.96 2.35 0.97 - 0.59 2.06 0.69 1.5
F 3.16 1.38 0.84 0.94 0.97 0.71 5.68 0.71 .97† - 2.22 2.59 0.97 - 0.66 2.25 0.78 2
G 3.59 1.5 1 1.16 1.06 0.88 6.35 0.88 1.06† - 2.44 2.76 1.03 - 0.72 2.59 0.88 2
H 4 1.62 1.14 1.31 1.19 0.94 7.14 0.94 1.16† - 2.78 3.16 1.16 - 0.88 2.84 1 2
I 4.84 2 1.44 1.63 1.5 1.31 8.63 1.13 1.36† 1 3.47 3.85 1.53 1.5 1.16 3.44 1.25 2.5
J 6.28 2.5 1.82 2.06 1.78 1.66 10.43 1.44 1.61† 1.31 4.59 4.77 1.96 1.88 1.41 3.84 1.56 3
K 7.54 3 2.26 2.63 2.41 1.88 12.52 1.63 2.08† 1.81 5.25 5.88 2.47 2.25 1.81 4.38 1.94 4
L 8.34 3.25 2.6 2.94 2.62 2.19 13.47 1.94 2.27† 2 5.96 6.37 2.62 2.31 2 4.5 2.19 4
N 10.34 4.25 3.01 3.5 3.41 2.69 16.65 2.38 3.02† 2.75 6.88 8.14 2.83 2.56 2.56 5.5 2.63 5
O 13.62 5 3.62 4.62 4 3 23.09 3 3.25 - 8.78 9.44 3.44 - 3.12 10 3.12 6.5
O 13.62 5 3.62 4.62 4 3 31.09 3 3.25 - 8.78 9.44 3.44 - 3.12 18 3.12 6.5
P 14.06 5.38 4.56 5 4.25 3.62 32.12 3 3 - 11.31 12.5 3.88 - 4 15 4 7
P 14.06 5.38 4.56 5 4.25 3.62 41.12 3 3 - 11.31 12.5 3.88 - 4 24 4 7
S 15.44 6 5.06 5.5 4.75 3.72 34.12 3.25 3.38 - 12.56 14 4.75 - 4.19 15 4.19 8
S 15.44 6 5.06 5.5 4.75 3.72 43.12 3.25 3.38 - 12.56 14 4.75 - 4.19 24 4.19 8
T 18.5 7 6 6.5 5.75 4.44 36.06 3.91 4.12 - 14.75 15.56 5.69 - 4.5 14.5 4.5 10
T 18.5 7 6 6.5 5.75 4.44 47.56 3.91 4.12 - 14.75 15.56 5.69 - 4.5 26 4.5 10
U 20.62 7.75 6.69 7.25 6.5 5.25 41.16 4.25 4.88 - 16.53 19.38 6 - 5 15 5 11.5
U 20.62 7.75 6.69 7.25 6.5 5.25 49.16 4.25 4.88 - 16.53 19.38 6 - 5 23 5 11.5
W 23 6.81 8.59 9.88 5.88 5.5 42.12 5.5 4.5 - 17.25 18.41 7 - 7 15 7 12
W 23 6.81 8.59 9.88 5.88 5.5 48.12 5.5 4.5 - 17.25 18.41 7 - 7 21 7 12

Important Notes

  • Proof load is 2 times Working Load Limit.
  • All carbon hooks designed with a 5/1 design factor.
  • All alloy hooks 1-22t designed with a 4.5/1 safety factor.
  • All alloy hooks 30t and larger designed with a 4/1 safety factor.
  • All bronze hooks designed with a 4/1 safety factor.

As advertised in Crosby General Catalogue 2009 Page 92, and previously in Crosby General Catalogue 2006 Page 88.

Imperial Specificationsdimensional drawing

Working Load Limit
(t)*
Hook ID
Code
Shank Hooks
Stock No
Shank
Length
Weight
Each
(lbs.)
Rep. Latch Kits
Carbon Alloy Bronze Carbon
S-319CN
Alloy
S-319AN
Bronze
S-319-BN

S-4320 Stock No.

PL Stock
No.

SS-4055
Stock No.

3/4 1 .5 D 1028505 1028701 1028900 Std. .50 1096325 - -
1 1.5 .6 F 1028514 1028710 1028909 Std. .75 1096374 - -
1-1/2 2 1 G 1028523 1028723 1028918 Std. 1.00 1096421 - -
2 3 1.4 H 1028532 1028732 1028927 Std. 1.82 1096468 - -
3 5 2 I 1028541 1028741 1028936 Std. 3.69 1096515 1092000 -
5 7 3.5 J 1028550 1028750 1028945 Std. 7.25 1096562 1092001 -
7-1/2 11 5 K 1028563 1028765 1028954 Std. 13.49 1096609 1092002 -
10 15 6.5 L 1028572 1028774 1028963 Std. 18.00 1096657 1092003 -
15 22 10 N 1028581 1028783 1028972 Std. 35.33 1096704 1092004 -
20 30 - O 1024386 1024803 - Std. 72.00 - 1093716 1090161
20 30 - O 1024402 1024821 - Long 85.50 - 1093716 1090161
25 37 - P 1024420 1024849 - Std. 134.00 - 1093717 1090189
25 37 - P 1024448 1024867 - Long 172.00 - 1093717 1090189
30 45 - S 1024466 1024885 - Std. 182.00 - 1093718 1090189
30 45 - S 1024484 1024901 - Long 214.00 - 1093718 1090189
40 60 - T 1024509 1024929 - Std. 268.00 - 1093719 1090205
40 60 - T 1024545 1024965 - Long 312.00 - 1093719 1090205
50 75 - U 1024563 1024983 - Std. 390.00 - 1093720 -
50 75 - U 1024581 1025009 - Long 426.00 - 1093720 -
- 100 - W - 1025027 - Std. 610.00 - 1093721 -
- 100 - W - 1025045 - Long 675.00 - 1093721 -
- 150 - X - 1025063 - Std. 735.00 - 1093721 -
- 200 - Y - 1025081 - Std. 1020.00 - 1093723 -
- 300 - Z - 1025090 - Std. 1390.00 - 1093724 -

Dimensions

Dimensions (in.)
Hook I.D. Code D F G H J K L M O O2 P R T T2 X* Y Z Deformation Indicator (AA)
 D 2.86  1.25 .73 .81 .93 .63 5.14 .63 .93 -- 1.96  2.35 .97 -- .59  2.06 .69 1.50
F 3.16 1.38 .84 .94 .97 .71 5.68 .71 .97 -- 2.22  2.59 .97 -- .66 2.25 .78 2.00
G 3.59  1.50 1.00 1.16 1.06 .88 6.35 .88 1.06 -- 2.44 2.76 1.03 -- .72 2.59 .88 2.00
H 4.00 1.62 1.14 1.31 1.19 .94 7.14 .94 1.16 -- 2.78 3.16 1.16 -- .88 2.84 1.00 2.00
I 4.84 2.00 1.44 1.63 1.50 1.31 8.63 1.13 1.36 1.00 3.47 3.85 1.53 1.50 1.16 3.44 1.25 2.50
J 6.28 2.50 1.82 2.06 1.78 1.66 10.43 1.44 1.61 1.31 4.59 4.77 1.96 1.88 1.41 3.84 1.56 3.00
K 7.54 3.00 2.26 2.63 2.41 1.88 12.52 1.63 2.08 1.81 5.25 5.88 2.47 2.25 1.81 4.38 1.94 4.00
L 8.34 3.25 2.60 2.94 2.62 2.19 13.47 1.94 2.27 2.00 5.96 6.37 2.62 2.31 2.00 4.50 2.19 4.00
N 10.34 4.25 3.01 3.50 3.41 2.69 16.65 2.38 3.02 2.75 6.88 8.14 2.83 2.56 2.56 5.50 2.63 5.00
O 13.62 5.00 3.62 4.62 4.00 3.00 23.09 3.00 3.25 -- 8.78 9.44 3.44 -- 3.12 10.00 3.12 6.50
O 13.62 5.00  3.62 4.62 4.00 3.00 31.09 3.00 3.25 -- 8.78 9.44 3.44 -- 3.12 18.00 3.12 6.50
P 14.06 5.38 4.56 5.00 4.25 3.62 32.12 3.00 3.00 -- 11.31 12.50 3.88 -- 4.00 15.00 4.00 7.00
P 14.06 5.38 4.56 5.00 4.25 3.62 41.12 3.00 3.00 -- 11.31 12.50 3.88 -- 4.00 24.00 4.00 7.00
S 15.44 6.00 5.06 5.50 4.75 3.72 34.12 3.25 3.38 -- 12.56 14.00 4.75 -- 4.19 15.00 4.19 8.00
S 15.44 6.00 5.06 5.50 4.75 3.72 43.12 3.25 3.38 -- 12.56 14.00 4.75 -- 4.19 24.00 4.19 8.00
T 18.50 7.00 6.00 6.50 5.75 4.44 36.06 3.91 4.12 -- 14.75 15.56 5.69 -- 4.50 14.50 4.50 10.00
T 18.50 7.00 6.00 6.50 5.75 4.44 47.56 3.91 4.12 -- 14.75 15.56 5.69 -- 4.50 26.00 4.50 10.00
U 20.62 7.75 6.69 7.25 6.50 5.25 41.16 4.25 4.88 -- 16.53 19.38 6.00 -- 5.00 15.00 5.00 11.50
U 20.62 7.75 6.69 7.25 6.50 5.25 49.16 4.25 4.88 -- 16.53 19.38 6.00 -- 5.00 23.00 5.00 11.50
W 23.00 6.81 8.59 9.88 5.88 5.50 42.12 5.50 4.50 -- 17.25 18.41 7.00 -- 7.00 15.00 7.00 12.00
W 23.00 6.81 8.59 9.88 5.88 5.50 48.12 5.50 4.50 -- 17.25 18.41 7.00 -- 7.00 21.00 7.00 12.00
X 24.38 6.75 9.12 10.94 6.00 6.00 45.75 6.00 4.50 -- 18.00 18.38 7.00 -- 7.25 18.00 7.25 13.00
Y 26.69 7.50 9.75 11.81 6.60 7.00 50.50 7.00 5.00 -- 19.75 20.50 8.00 -- 8.00 20.00 8.00 13.00
Z 30.12 9.50 10.62 12.94 8.00 7.25 54.69 8.00 6.25 -- 22.69 23.50 8.25 -- 9.50 20.00 9.50 15.00
Crosby-catalogue-page-number-122-123.pdf

Product Warnings

PDF containing all warning information relevant to the safe use of this product
(approx. 0.3Mb)

Contact Us About This Product

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Top