Crosby AS7 Bullet Jaw and Jaw Swivel - Range from 450kg to 35,000kg
Model: Crosby AS-7 / BJJS-2498
Crosby Bullet Style Jaw & Jaw Angular Contact Bearing Swivel.
Our options for the Crosby AS7 Bullet Style Jaw / Jaw Angular Contact Bearing Swivel give a good range of product available with capacity: .45 through 35 tons and Wire Rope Sizes: 1/8" to1-1.5"
- Angular contact bearings maximize efficiency, reliability and service life of swivel and extend the life of the wire rope.
- Designed for high rotation speed: Lower torque required to initiate rotation.
- Individually Proof Tested to 2 times the Working Load Limit with certification.
- Hook models utilize genuine Crosby hooks which are forged alloy steel, Quenched and Tempered and contain the patented QUIC-CHECK markings.
- Design Factor of 5 to 1.
- Entire swivel is Zinc plated to resist corrosion.
- Each swivel, 8.5 tons and larger is furnished with a pressure lubrication fitting.
Imperial Table
|
AS-7 Bullet Style JAW & JAW |
Dimensions (in.) | ||||||||||||||
|
Working Load Limit* (Tons) |
Wire Line Size (in.) |
AS-7 Stock No. |
Weight Each (lbs.) |
A | B | C | D | E | F | G | |||||
| .45 | 1/8 | 1016604 | .4 | .88 | 2.38 | 3.13 | .38 | .25 | .31 | .40 | |||||
| .75 | 1/4 | 1016611 | 1.1 | 1.31 | 3.56 | 4.44 | .44 | .31 | .38 | .56 | |||||
| 1.5 | 3/8 | 1016622 | 1.8 | 1.63 | 4.06 | 5.19 | .56 | .50 | .44 | .81 | |||||
| 3.0 | 1/2 | 1016631 | 3.8 | 2.00 | 5.44 | 7.06 | .81 | .75 | .63 | .94 | |||||
| 5.0 | 5/8 |
1016640 |
8.0 | 2.50 | 7.75 | 10.06 | 1.13 | 1.00 | .88 | 1.56 | |||||
| 8.5 | 3/4 | 1016649 | 14.5 | 3.00 | 9.88 | 12.38 | 1.25 | 1.31 | 1.00 | 2.13 | |||||
| 10 | 7/8 | 1016652 | 40.0 | 4.00 | 13.13 | 16.75 | 1.75 | 1.75 | 1.50 | 3.25 | |||||
| 15 | 1 | 1016658 | 40.0 | 4.00 | 13.13 | 16.75 | 1.75 | 1.75 | 1.50 | 3.25 | |||||
| 25 | 1-1/4 | 1016662 | 84.0 | 5.00 | 15.94 | 20.75 | 2.38 | 2.00 | 2.00 | 3.69 | |||||
| 35 | 1-1/2 | 1016667 | 84.0 | 5.00 | 15.94 | 20.75 | 2.38 | 2.00 | 2.00 | 3.69 | |||||
Metric Table
Metric Dimensions Not AvailableProduct Options
AS-20 thimble Insert
- When terminating with wire rope clips, we recommend tde use of the thimble Insert. The result will be extended wire rope life.
- Allows standard swivel to be used in application requiring a thimble fitting.
- For use with our Bullet Style (AS-7) and Jaw Style (AS-1, AS-2, AS-3 & AS-4) swivels.
- Machined from carbon steel. Zinc plated.
| METRIC Rope Size (mm.) |
AS-20 Stock No. |
| 13 | 1038200 |
| 16 | 1038209 |
| 19 | 1038218 |
| 22-25 | 1038227 |
| 28-32 | 1038236 |
| 38 | 1038245 |
| IMPERIAL Rope Size (in.) |
AS-20 Stock No. |
| 1/2 | 1038200 |
| 5/8 | 1038209 |
| 3/4 | 1038218 |
| 7/8 - 1 | 1038227 |
| 1-1/8 - 1-1/4 | 1038236 |
| 1-1/2 | 1038245 |
As advertised in Crosby General Catalogue 2009 Page 120, and previously in Crosby General Catalogue 2006 Page 113.
NOTE: Pricing and specifications may be subject to change without notice. Prices shown may be UK only prices and therefore export pricing may vary dependant on location.
Images are for display purposes only.
Images are for display purposes only.
