Sala Advanced Davit Arm Confined Space Entry and Rescue System with a Large Selection of Socket, Hoists and Inertia Reels
Sala (UCL) Advanced Confined space access and rescue system. Up to 3.378 m High and 120cm reach
|(1) - Primary Pulley
|(2) - Secondary Pulley
|(3) - Auxiliary Suspension Point
|(4) - Inertia Reel
|(5) - Shows the "Fine" Height [ Reach Adjustment Screw
|(6) - Fall arrest inertia real with backup retrieval winch.
|(7) - Shows Reach Adjust
|(8) - Man lifting winch
|(9) - Davit top / davit arm assembly (modular).
|(10) - Vertical Extension Pole
|(11) - Socket
The Sala (previously UCL) Advanced Series Hoist Systems are designed for all types of manriding, fall arrest and rescue applications including manhole and confined space entry / retrieval and rescue applications. These are top of the range units, they are constructed from lightweight materials, mainly high-strength aluminum and are extremely portable.
Versatility is the key with this unique Davit system. Built around two choices of fully adjustable horizontal jib arm. Both jibs have height and reach adjustment via the sliding tube and fine adjustment via the threaded bar. All other components are fully customised to match your individual requirements. The vertical pole is supplied as either 1, 2 or 3 piece dependant on your needs with combinations enabling a portable davit systems to be supplied up to 3378 mm overall height and 1067mm reach.
The Davit rotates through 360 degrees and is supported by a davit socket connected to the supporting structure.
Confined space 'access and agress' areas are mostly in locations that are short of space, making it difficult to set-up the entry system. Using a pre-installed socket means that one davit system can be used to service many sockets.
We offer a wide choice of socket designs made from corrosion resistant steel or from stainless steel for ultimate protection from corrosion.
- Portability: Lightweight modular design easily transported between locations
- Versatility: Height and reach adjustable with mounting options to suit most applications.
- Strong: Davits feature a 5000 lbs (2272 kg) anchor point for fall arrest anchorage.
- Small or Tall: From XXX metre to 3,378 metres overall height - Eliminates the need for custom length masts and extensions.
- Manriding Options: Davits can be equipped with back mounted man rated lifting winches / hoists. height of lift to customers requirements.
- Fall Arrest and Rescue: Also fitted with optional Fall arrest inertia reels to the vertical column retrieval capabilities (rescue winch).
- Mast (vertical pole) / Extensions: Allow the user to increase the overall anchorage height of the system.
- Base / Anchorage Options: Many options as detailed further in the 'Tabs' above.
DBI-Sala sealed retriver block with a 140kg manriding capacity.
- 140 kg Capacity
- Meets IP58, IP68
- Davit Arm Bracket (Optional)
- 1633 kg Rated Gate
- Self-Locking Gate
- Swiveling Hook
- Impact Indicator on Hook
- ANSI Z359.1/ Z359.12 Compliant
- 5mm Diameter Wire Rope
- Aluminum Housing
- Stainless Steel End-Plate.
- Stands up to the harshest environments!
- Heavy-duty design: • Corrosion resistant • Stainless steel end-plates • Aluminum housing.
- Offshore platform access
- Confined space
- Saltwater environments
- Dirty environments
- Oil and Gas
- Off-Shore Wind Energy
- Waste water treatment
Advanced Socket Options
Floor Mount Davit Socket Sleeve - Bolt down
Zinc-plated mild steel construction. Mounts to horizontal concrete or steel structure. Comes with PVC sleeve liner.
Weight: 5.9kg (13 lbs)
8516190 - Zinc-plated mild steel
8518347 - 304 Stainless Steel.
Cast In Concrete Core Mount Socket Sleeve
Zinc-plated mild steel construction. Designed for slip-in installation in 4"Ø (101.6mm) core hole in concrete or steel structure. Comes with PVC plastic sleeve liner.
Weight: 3.6kg (8 lbs).
8510109 - Zinc-plated mild steel
8510110 - 304 Stainless Steel.
Wall Mount Socket Sleeve - Bolt on
304 Stainless steel construction. Compact design creates minimum intrusion into work space. Mounts to vertical concrete or steel structures. Comes with PVC sleeve liner.
Weight: 5.5kg (12 lbs).
8518348 - Zinc-plated mild steel
8516191 - 304 Stainless Steel.
|Flush Floor Mount Davit Socket Sleeve
Mild steel construction. Recessed fastener pockets allow for bolt-in installation into existing concrete or steel structure. Flush mount design allows passage of traffic and eliminates trip hazards when not in use. Comes with PVC sleeve liner.
Weight: 9.5kg (21 lbs).
Also available in Stainless steel construction for existing concrete installation.
8510316 - Zinc-plated mild steel
8512827 - 304 Stainless Steel.
Flush Floor Mount Davit Socket Sleeve - Cast In Concrete
Mild steel construction. Comes with pins for fresh concrete and cast-in-place concrete anchors for new construction or renovation. Flush mount design allows passage of traffic and eliminates trip hazards when not in use. Comes with PVC sleeve liner.
Weight: 9.5kg (21 lbs).
Also available Stainless steel with pins for fresh installation.
8510311 - Zinc-plated mild steel
8512828 - 304 Stainless Steel.
Flush Floor Mount Sleeve - Bolt Down
Zinc plated mild steel construction. Mounts to existing concrete. Comes with PVC sleeve liner.
Weight: 5.9kg (13 lbs).
Also available in stainless steel construction.
8512831 - Zinc-plated mild steel
8516563 - 304 Stainless Steel.
Deck Mount Davit Socket Sleeve
Designed to slip into a 4" (101.6mm) hole in existing flooring. Flush mount design allows passage of traffic and eliminates trip hazards when not in use. Comes with all necessary hardware. Mounts to thicknesses from 1/4" (6.4mm) to 2.0" (50.8mm) max.
Weight: 7.7kg (17 lbs).
Also available in stainless steel. Includes plastic stopper and mounting hardware.
8515162 - Zinc-plated mild steel
8515834 - 304 Stainless Steel.