"1102 Series" Rotary Union Slow Rotation Swivel
High pressure corrosion resistant rotary union.
1102 Series Rotary Union Slow Rotation Swivel
Features and Benefits
- Bi-Directional Swivel - 1102 Series swivels are for applications where complete rotation is not necessary
- Slow Rotation Applications - Designed for swiveling or slow rotation application
- High Pressure - The 1102 will operate at pressures up to 1160 PSI
- Superior Sealing Performance - The 1102 series has the GR Seal for Superior sealing performance
- Multiple Configurations - Available with axial (straight through) flow, or radial flow with the addition of a 90º stainless steel elbow
- Corrosion Resistant - Features nickel plated carbon steel construction. Stainless steel models are also available
- Stability at Higher Speeds & Pressures - The 1102 Series offers two ball races which allow for increased pressure and speed
1102 Series Slow Rotation Swivel Rotary Union Diagram
|Nominal Pipe Size||Shaft Thread (A)||B||C||DN||F||G||H||I||J||L||M|
1102 Series Slow Rotation Swivel Rotary Union Specifications
|Nominal Pipe Size||Shaft Thread (A)||Axial Flow||with Stainless Steel Elbow|
|Nickel Plated Steel||Stainless Steel||Nickel Plated Steel||Stainless Steel|
|Part Number||Description||Part Number||Description||Part Number||Description||Part Number||Description|
1102 Series Slow Rotation Swivel Rotary Union Performance Charts
Rotary Union Design
While rotating joints come in many shapes, sizes, and configurations, they always have the same four basic components: housing, a shaft, a bearing (or bearings) and a seal.
The heart of the Rotary Union or rotary joint is the seal.
The seal prevents the medium (water, oil, air, etc) from leaking outside the Rotary Union while the Rotary Union is in operation.
Duff-Norton uses four basic types of mechanical seals in its Rotary Unions: 1) pusher-type end face mechanical seal, 2) non-pusher type end face mechanical seal, 3) lip seals and 4) o-ring seal. Rotary Unions may have more than one seal.
The second most important part of the Rotary Union is the bearing. A Rotary Union may have only one bearing or multiple bearings.
Roller bearings, such as ball bearings and tapered roller bearings, or non-roller bearings, like graphite bearings and bronze bushings, may be used in the Rotary Union.
The bearings are always used to allow a part of the joint, either the shaft or the housing, to rotate.
The shaft is the component that carries the medium through the Rotary Union into the drum or roll. In many cases, the shaft will turn with the drum or roll. In some cases, like in larger flanged rotary Unions, the shaft may be stationary while the housing rotates. The bearings and seal are typically assembled around the shaft.
The housing is the component that holds all of the other elements of the Rotary Union together. The housing has an inlet port, which is a threaded port to which the hose supplying the medium will be attached .
The Rotary Union may also have an outlet port, if the same joint is being used both to supply fluid to a roll and to remove fluid from the roll. In smaller Rotary Unions, the housing is stationary. In larger Rotary Unions, the housing maybe bolted to the drum or roll using a flange. In these cases, the housing rotates at the same speed as the drum.