Unfortunately this lanyard has been discontinued/superceded. Please see our complete range of fall arrest lanyards for a possibly suitable alternative.

• Lanyard with integral energy absorber CE marked and conforming to the standard EN355.
• Lanyard base available in 2 lengths 1.75m and 1.25m which are equipped with a triangular screw link* for attachment to a harnesses fall arrest point. The lanyard may be equipped with a choice of connectors from the Sala range, see the Technical Data sheet for connector compatibility.
• From the SALA 'EXPANDER' range of lanyards, the expander system reduces this lanyards overall length whilst not under tension by 0.5 metres for the 1.75m and 0.4 for the 1.25m. Thus reducing potential trip, or snarling hazards and offering maximum freedom of movement during use.

* 'Screw links' or semi permanent links are not designed to be opened during the course of work. They should always be closed with the addition of a thread locking compound, using a suitable spanner.

Main Features

• 'EXPANDER' elastic system reduces length whilst not under tension.  By up to 0.5metre.
• 'ZORBA' energy absorber, in case of a fall, reduces forces to around 4.5kN, with elongation of around 1.5meters
• CE marked : EN355
• Comes with semi permanent triangular screw link*
• Available in 2 base lengths, 1.25m and 1.75m
• Individual serially numbered, for quality control purposes
• Large choice of compatible connectors available.

Applications

Designed for fall arrest situations;

• Mast tower work
• Pitched roof
• Flat roof
• Scaffolding/steel work
• Structural steel

Associated Products

This lanyard must be used the following products;

• A Sala full body fall arrest harnesses conforming to EN361
• It may be use with either the front or rear fall arrest point
• A Sala Karabiner or connector conforming to EN362

Technical Specification

• Yellow lanyard webbing - 35mm width, 100% Polyester, Breaking strength >3000 daN
• Blue absorber webbing : 43mm width, 100% Polyester, Breaking strength >2400 daN
• White absorber webbing Ð 45mm width, Polyester and polyamide construction, Initial tear out threshold >2kN, Dynamic energy tear out threshold <6kN.
• Thread - High strength, 100% Polyester
• Triangular screw link * - Breaking strength > 2750 daN, 8mm diameter, Steel with white zinc plating finish.
• Individual serially numbered
• Conforms to standard : EN355
• System breaking Strength >15KN