US Fed Spec Alloy Steel Bow Shackles

Quick Ref: CN-1902

There is currently no description for this category, please view the items below to find out more.
US Fed Spec Alloy Steel Bow Shackles

Crosby Screw pin anchor shackles. Features: Hot dip galvanized or self-coloured, fatigue rated, shackles can be furnished proof tested with certificates to designated standards, charged for proof testing, shackles are quenched and tempered. Look for the red pin... the mark of genuine Crosby quality.

Crosby Bolt Type Anchor Shackles. Features: Forged quenched and tempered, with alloy pins. Hot Dip galvanized or self-colored; Fatigue rated.

Look for the Red Pin, the mark of genuine Crosby quality.
Crosby Alloy Bolt Type Anchor Shackles. Features: Forged Alloy Steel 30 thru 175 metric tons. Cast Alloy Steel 200 thru 400 metric tons. Working Load Limit is permanently shown on every shackle. All sizes are individually proof tested to 2.0 times the Working Load Limit. Pins are galvanized and painted red.
Certification must be requested at time of order. Shackles are quenched and tempered and can meet DNV impact requirements of 42 joules at -20 C.
Bolt and Pin Anchor Shackles (Bolt & Nut) for use in temperature ranges from -40°C to 200°C.
High Tensile Steel, Quenched & Tempered, Grade 8 Gunnebo "Anja 858 Super Shackle" Bow Shackle Range 3,300kg to 150,000kg, High Tensile Steel, Quenched & Tempered, Grade 8
High Tensile, Quenched & Tempered Gunnebo "857" Heavy Duty Bow Shackle Range 150,000kg to 300,000kg, High Tensile, Quenched & Tempered
Crosby Alloy Screw Pin Bow Shackles. Capacities 2 thru 21 metric tons. Forged Alloy Steel - quenched and tempered, with alloy pins. Working Load Limit permanently shown on every shackle. Hot Dip Galvanized
Crosby grade 8 (80) bolt type alloy anchor shackles, with an 8/1 factor of safety. Crosby grade 8 (80) bolt type alloy anchor shackles, with an 8/1 factor of safety.
Features: Working Load Limit permanently shown on every shackle, forged alloy steel - quenched and tempered, with bow and bolt, hot dip galvanized; shackles can be RFID EQUIPPED. Shackles are quenched and tempered and meets DNV impact requirements of 42 joules (31 ft. Ibs.) at -40 degree C (-40 degree F).
Special alloy steel, quenched and tempered bolt type safety shackles. Gunnebo "Type A" Grade 8 Bow Shackle Range 2,000kg to 8,000kg, Special alloy steel, quenched and tempered.
Crosby Wide body screw-pin shackles.

These shackles significantly improve the life of wire rope slings. They can be used to connect HIGH STRENGTH round slings, synthetic round slings or wire rope slings. An increase in shackle bow radius provides minimum 58% gain in sling bearing surface, increases usable sling strength a minimum of 15%.
Features: Quenched and tempered for maximum strength, forged alloy steel, available in galvanized (G2169) and self-coloured (S2169) finish.

Capacities of 7, 12.5 and 18 metric tonnes

Crosby Wide Body Shackles with bolt type fixing. All sizes of this shackle are Quenched and Tempered for maximum strength. Made from forged alloy steel from 7 through 300 metric tons and cast alloy steel from 400 through 1550 metric tons. All ratings are in metric tons, embossed on side of bow. Sizes 300 tons and smaller are proof tested to 2 times the Working Load Limit. Sizes 400 tons and larger are tested to 1.33 times the Working Load Limit. G-2160 bows are furnished Dimetcoted and pins are Dimetcoted, then painted red. 30-1550t are RFID equipped. Greatly improves wear-ability of wire rope slings.
Crosby Round pin anchor shackles.

Available in capacities 1/2 thru 35 metric tons. Forged - quenched and tempered, with alloy pin. Working Load Limit permanently shown on every shackle, hot dip galvanized or self-coloured, fatigue rated and shackles are quenched and tempered and can meet DNV impact requirements of 42 joules at -20 degrees C.

Look for the Red Pin... the mark of genuine Crosby quality.

Crosby Cold-Tuff Anchor Shackles. Crosby Bolt Type Anchor shackle with thin head bolt has the Working Load Limit permanently shown on every shackle and individually serialized with certification. Forged - quenched and tempered, with alloy bolt. G-2130CT - Carbon Steel; G-2140CT - Alloy Steel; Fatigue rated (G-2130CT only). All sizes are individually proof tested to 2.0 times the Working Load Limit. Finish is inorganic zinc primer or hot dipped galvanized. Bow and Bolt are certified to meet charpy impact testing of 31 ft-lbs. min. ave. at -4 F. Individually mag Inspected with certification.  COLDTUFF® shackles are suitable for use at -50F.
Crosby G209R ROV anchor shackles.

These shackles have capacities from 6.5 to 55 metric tonnes. They are forged - quenched and tempered, with alloy pins. The working load limit is permanently shown on every shackle. The also feature quick-check deformation and angle indicators forged on the bow.

All ROV shackle bows, unless otherwise noted are galvanised and then painted fluorescent yellow.

Threaded Bolt With Locking Pin Gunnebo "860" Anja ROV Bow Shackle Range 12,000kg to 55,000kg, Threaded Bolt With Locking Pin
Anchor shackles with safety pin for underwater applications. Nominal shackle diameters from 22mm to 50mm. These shackles are designed specifically for ROV applications and are manufactured with the highest quality steel available. They are also individually stamped with the safe working load. Proof tested to 2 times the safe working load - test certs are provided. Painted white to ensure ease of sight in water.

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Top