Crosby Turnbuckles
Crosby manufacture a large range uf open body turnbuckles with a variety of end fittings to suit most application in any combination (jaw, hook and eye)
Turnbuckles are often referred to as rigging screws, the Crosby range offer both metric and imperial threads with a choice of different thread lengths and safe working loads and are manufacturered to US Federation Specification.
Crosby Turn buckles are recommended for straight line pulls only. please contact our technical staff if you are considering using the rigging screws for a lifting application.
Crosby "HG-223" Hook & Hook Turnbuckles Certified for Lifting Applications - Range from 180kg to 2270kg
1.
Crosby Hook & Hook Turnbuckles for Lifting, Holding And Tensioning
Here we offer Crosby HG223 Hook and Hook Turnbuckles. The extremity fittings (hooks) are quenched and tempered, the body is heat treated and supplied galvanized steel to ensure that this top quality product is corrosion resistant. These Crosby hooks are forged with a greater cross sectional area which results in a stronger hook with better fatigue properties. Lock Nuts available for all sizes. Fatigue Rated.
Model: Crosby HG-223
Crosby "HG-225" Hook & Eye Turnbuckles Certified for Lifting Applications - Range from 180kg to 2270kg
2.
Crosby Hook & Eye Turnbuckles for Lifting, Holding And Tensioning
This is our range of Crosby HG225 Hook and Eye Turnbuckles, they are supplied with end fittings that are quenched and tempered. The body of each is heat treated by normalizing. Working load limits are available from 180kg to 2.27 tonne. All the Crosby turnbuckles are supplied hot dip galvanized for long life in corrosive areas. Lock nuts available for all sizes. Fatigue rated
Model: Crosby HG-225
Crosby "HG226" Eye & Eye Turnbuckles Certified for Lifting Applications - Range from 230kg to 34,000kg
3.
Crosby Eye & Eye Turnbuckles for Lifting, Holding And Tensioning
Crosby HG226 Eye / Eye Turnbuckles are all supplied hot Dip galvanized with the end fittings quenched and tempered. These Crosby HF226 turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. Working load limits vary dependant on your application as do the lengths of each rigging screw available. For turnbuckle sizes 1/4" through 2-1/2", a shackle one size smaller can be reeved through eye. Lock Nuts are available for all sizes. Fatigue Rated
Model: Crosby HG-226
Crosby HG227 Jaw & Eye Turnbuckles Certified for Lifting Applications - Range from 230kg to 34,000kg
4.
Crosby Jaw & Eye Turnbuckles for Lifting, Holding And Tensioning
The end fittings of the HG227 are quenched and tempered and the bodies heat treated by normalizing. The turnbuckles eyes are forged and elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckles size 1/4" through 2-1/2", a shackle one size smaller can be reeved through eye. Lock Nuts are available for all sizes. Fatigue Rated.
Model: Crosby HG-227
