Round Section Lifting Clamps
Camlok BTR Pipe Grabs - 2500kg or 3500kg
Product Images
Camlock pipe grabs are designed to handle concrete tubes, pipes and rolls etc. the jaws can be fitted with plastic or rubber lined pads. They are fitted with an automatic open / close device. Minimizes trench width allowing fast installation of load.
- Model: Camlok BTR
Camlok BRL Spring Balanced C-Hook - Range 1000kg to 3000kg
Product Images
The BRL C-Hook can be modified to suit a wide range of applications. Please contact our sales team for more information.
It is designed for lifting and handling of pipe sections in the horizontal position. Fitted with spring balance, adjustable end stop and chain. The end stop ensures correct positioning of...
- Model: Camlok BRL
Camlok PH Pipe Hooks - Range from 2000kg to 10,000kg
Product Images
Camlok PH Series Pipe Hooks are used in pairs to handle pipe / tubes etc. Available with 2 legged chain slings and / or polyurethane coated Type A, 60 to 90 degrees Type B, 90 to 120 degrees. They are manufactured from special high tensile steel
SWL (safe working load) options available: 2 tonnes, 4 tonnes, 6 tonnes, 8...
- Model: Camlok PH
Camlok TDI Coil Grabs - Range from 100kg to 1000kg
Product Images
Available in three versions for handling, cylindrical and rectangular hollow loads and a range of optional jaw linings.
- Model: Camlok TDI
Camlok TRU Round Stock Grabs - Range from 100kg to 4000kg
Product Images
The TRU round stock scissor grab is designed to lift and handle material such as tubes, pipes, rolls of plastic and roofing felt. The jaws can be fitted with plastic or rubber lined pads to minimise marking of sensitive surface materials; the lining also helps prevent items slipping if the grab has not been positioned...
- Model: Camlok TRU
Tractel TOPAL RB Manhole Hook for Use in Pairs or Sets of Three - Range from 500kg to 1500kg
Product Images
The Tractel TOPAL Manhole Hooks are used for lifting vertical wells of round, square or rectangular concrete. The hooks have a grooved surface that ensures perfect grip on the materials in case of shock whilst moving the load.
Their use does not require any adjustment and the...
- Model: TTR-3314
Tractel TOPAL F Pipe Hooks - Range 1000kg to 7500kg
Product Images
The Tractel TOPAL F is a handling hook designed to horizontally lift cast iron or steel pipes. These hooks are specifically designed to be used in pairs with a wire rope, chain or strap 2 legged sling.
Tractel TOPAL F pipe hooks are available in the following sizes:1000kg/opening 0 - 60mm, 2500kg/opening 0 -...
- Model: Tractel TOPAL F
Tractel TOPAL TI Clamp for Horizontal Lifting and/or Laying in Trenches of Pipes- Range 500kg to 1000kg
Product Images
This is an accessory to transport horizontal pipes and lay them into trenches. Also designed to transport bars and tubes of any material.
S = semi-automatic laying down - Semi-automatic model: manual grab action and automatic locking of the grab in the open...
- Model: Tractel TOPAL TI
Tractel SCX/CX TOPAL Lifting Beams for Cone-shapped Concrete Manhole - 1000kg
Product Images
The CX ensures contact at two points of loading. The SCX is more robust for intensive use and ensures 3 point loading. These accessories are fitted with polyurethane coated pads which enable the handling of cone shaped manholes without marking. Delivery includes a chain sling (CX1 model).
- Model: TTS-3316
Tractel TOPAL RT Round Bar and Pipe Clamps - Range from 500kg to 3000kg
Product Images
The Tractel TOPAL RT is used for the lifting of rods, tubes, profiles and various small squares in circles or bundles. Once it's locked in the open position this allows you to deposit the load without any action on the caliper. These accessories are fitted with an open position locking system allowing to lay...
- Model: Tractel TOPAL RT
Riley Superclamps P Adjustable Pipe and Round Section Lifting Clamps - Range from 1000kg to 4000kg
Product Images
Riley pipe lifting clamps are designed for efficient and easy handling of cylindrical objects such as pipes or bars.
This clamp is readily applied to cylindrical objects, and the adjustable jaw grip allows for a wide range of cylindrical diameters of sections to be lifted....
- Model: APAR-3362
Crosby IPCC Vertical Lifting Clamp for Lifting Concrete Pipe Sections - 500kg
Product Images
The IPCC vertical lifting clamp is designed for the lifting and transfer of concrete pipe sections and wells. It is to be exclusively used per pair or per three clamps. This has a very easy application and removal of the clamp thanks to the built in carrying grips.
Higher WLL and different...
- Model: Crosby IPCC
