Ridgegear Steel Karabiners and Connectors

The RGK13 is a stronger alternative to the RGK1. It is used in a vast variety of applications such as rope access and fall arrest. The screw gate closure on this device means that the user must manually lock the RGK13 after attachment to an approved anchorage point. With a gate opening of 14mm. Accredited to EN362.

The RGK13P is the same as the RGK13 but has the added advantage of a retention pin which allows you to captivate it to a lanyard. With a 14mm gate opening. Accredited to EN362.

The RGK1 is the workhouse of the industry, used from rope access, to fall arrest applications. This item is also used in the leisure industry for caving and rescue. The screw gate closure on this device means that the user must manually lock the RGK1 after fitting. With 19mm gate opening. Accredited to EN362.

The RGK2 is an extremely safe karabiner to use, as it takes user intervention out by locking automatically. Similar to the RGK1 in size and weight, the RGK2 is ideal for lanyards and aid climbing. With 17mm gate opening. Accredited to EN362.

The RGK16 is a steel, captive eye Karabiner. This item is predominantly used as a connector on fall arrest lanyards and webbing. With an 18mm gate opening. Accredited to EN362.

This heavy weight karabiner is primarily fitted to the ends of fall arrest lanyards, due to its high MBS. The twistlock closure makes this karabiner extremely safe to use, as it locks automatically when it is clipped into anchorage point. With a 22mm gate opening. Accredited to EN362.

This triple action karabiner is one of the safest in the industry. In order to open it, the operator has to lift the barrel, then twist and finally open the sprung gate. In addition to the super safe properties of this karabiner, it also has the benefit of super strength. With a 24mm gate opening. Accredited to EN362.