Petzl Sit Harnesses

Petzl Falcon Mountain Rescue Sit Harness has attachment bridge construction for optimum mobility when progressing with climbing techniques. Waist Belt and leg loops equipped with two self locking Double Back buckles. Available in 2 different sizes. Size 1 - Waist belt 75-104cm, Leg loops 53-66cm. Size 2 - Waist belt 97-125cm, Leg loops 55-75cm.

Lightweight Sit Harness has 2 lateral attachment points that transfer the weight evenly around the waste belt for comfortable surface-supported work. Four equipment loops : two large rigid ones in front for easy access to gear and two small flexible ones in back that will not interfere with wearing a backpack. Also available in all black option. Available in 2 sizes. Size 1 - Waist belt 75-104cm, Leg loops 53-66cm. Size 2 - Waist belt 97-125cm, Leg loops 55-75cm.

Waistbelt and suspension seat lined with breathable perforated foam for maximum comfort. Two-part ventral attachment point increases the efficiency of rope ascents when using a CROLL. Textile lateral attachment points for occasional use. Rear attachment buckle for connecting a CROLL ventral rope clamp using a SECUR shoulder strap or a TOP CROLL chest harness. Waistbelt and leg loops equipped with two self-locking DoubleBack buckles. Four equipment loops: two large rigid ones in front for easy access to gear and two small flexible ones in back that will not interfere with wearing a backpack. Two slots for CARITOOL tool holder.

Work Positioning Sit Harness has a wide semi-rigid waist belt for excellent support. Waist belt equipped with self-locking Double Back buckles, Waist belt and suspension seat lined with breatheable perforated foam for maximum comfort when suspended. Available in 3 sizes, Size 0 - Waist belt 68-95cm, Leg loops 45-60cm. Size 1 - Waist belt 75-104cm, Leg loops 53-66cm, Size 2 - Waist belt 97-125cm, Leg loops 55-75cm.

Petzl Pandion Climbing Harness is perfectly designed for mountaineering, glacier travel and adventure racing because its so lightweight and compact. It's also a great first harness for beginning climber with adjustable leg loops allowing size to be adjusted depending on the comfort desired or layers of clothing worn and permits the harness to be put on when wearing skis or crampons. DoubleBack buckles are pre-threaded and adjust quickly with a single pull, helping to ensure proper closure, single Dyneema-reinforced tie-in point for increased durability, flexible equipment loop stays out of the way while wearing a pack, detachable elastic leg loop straps and leg loops and waistbelt are color coded to facilitate donning. Only one size available.

Frame Construction technology: Bias webbing transfers load and distributes pressure over entire surface area of the waistbelt and leg loops, flat webbing reinforcement in waistbelt and leg loops offers increased comfort when hanging, ergonomically-shaped leg loops and waistbelt, breathable mesh exterior, closed cell perforated foam padding and polyester 3D wicking mesh provide maximum ventilation, optinal relationship between dimension, weight and comfort, doubleBack buckles on leg loops allow size to be easily adjusted when wearing different thicknesses of clothing to suit the climber's individual body shape while hanging for greater comfort. Two DoubleBack buckles allow waistbelt to be adjusted and secured in a single movement and dual waist buckles allow tie-in point to be centered and equalize the equipment loops on each side.

The harness has a waist belt and suspension seat lined with breathable perforated foam for maximum comfort when suspended, a ventral attachment bridge which is attached to the waist belt and to the leg loops by two gated rings in order to: distribute the pressure evenly between the waist belt and leg loops (three positions), adapt the length of the ventral attachment bridge or install two ventral attachment bridges. To attach the ring S or the swivel directly to the attachment bridge ventral attachment point and the rear waist belt buckle, used to attach the Croll ventral rope clamp for ascending a single rope. There's two lateral attachment points transfer the weight evenly around the waist belt for comfortable surface-supported work, five equipment loops with protective sheath, two rings for attaching a hand saw, slots for Caritool tool holder and a waistbelt equipped with self-locking double-back buckles

Petzl Sequoia Tree Climbing Sit Harness has an extra wide, semi-rigid waist belt that offers great support and exceptional ventilation. It's easy to slip on with the fast waist belt and leg loop buckles. The ventral attachment bridge provides lateral mobility. Distribute the pressure evenly between the waistbelt and leg loops (three positions, Adapt the length of the ventral attachment bridge, attach the rings or the swivel directly to the attachment bridge, also with five equipment loops with protective sheath and two rings for attaching a hand saw. Available in 2 sizes: Size 1 - Waist belt 75-104cm, Leg loops 53-66cm. Size 2 - Waist belt 97-125cm, Leg loops 55-75cm.