Hook Suspended Drum Handling Equipment
We have a large range of hook suspended drum handling attachments, all marked down from the RRP
Camlok DBT Crane Suspended Drum Turning Grab - 300kg Capacity
Product Images
This is designed to lift drums in the vertical position and turn them through 90 degrees to the horizontal position. Can be used to tip containers to 180 degrees but it can not place the drum down in this position.
- Model: Camlok DBT
Camlok DA DAF Crane Slung or Fork Mounted Drum Grab for Steel Drums - 350kg Capacity
Product Images
The DAF is fitted with adjustable arms to suit fork lift truck tine centres of 570mm to 850mm. This does not subject the drum to crushing loads. Designed to handle round materials such as drums in the vertical position.
- Model: Camlok DA/DAF
Fork Truck Mounted (and Crane Mounted) "Semi Automatic" Drum Lifting Device - 500kg or 1000kg
Product Images
This may be fitted under a fork mounted hook, fork or carriage mounted jib, or under an overhead or lorry mounted crane. This is semi automatic in operation. This drum lifter is used for picking up 210 litre drums of the tight-head or open topped steel varieties. Simple but effective...
- Model: SADT-552
Economy Imported Overhead Crane Mounted "Geared Rotation" Drum Lifter and Rotator - 364kg Capacity
Product Images
The geared chain control makes this lifter suitable for use at any height. 10ft Control chain can be locked to secure in transit and dispensing.
- Model: DLD-686
Overhead Crane Mounted Automatic Drum Lifter for Lifting Steel or Plastic L Ring Drums from 550mm to 620mm Diameter. - 500kg Capacity
Product Images
This can either be used under slung from a forklift or overhead from a crane hoist.
- Model: DTG-AU-SG-1
Camlok DC500 Drum Lifting Clamp - 500kg (each)
Product Images
This range of clamps permit the safe handling of all types of flanged drums with or without lids. This can be used to lift sealed drums on their own, if an open drum is to be lifted without spilling the contents, two clamps can be used with either a two leg chain sling or a small lifting beam and two slings. (Chain sling not...
- Model: Camlok DC500
Camlok DT Crane Slung Drum Tongs For Lifting Steel Drums - 500kg
Product Images
This is designed for the safe transportation of drums in the horizontal position. The level is designed to be pulled upwards which will close the tongs, it is fitted with a manually operated hold-open lever.
This is suitable for drums with lengths ranging from 600mm to 900mm and a WLL of 500kg.
- Model: Camlok DT
Universal Fork truck Mounted (and crane slung) Drum Rotator. Rotation by Crank Handle or by Loop Chain - 360kg
Product Images
This is the perfect solution for the rotation of drums where the drums you are using are of mixed variety. Designed to handle any type of drum including fibre, plastic or steel, in 110 or 210 litre sizes. Can be used on a fork truck or overhead crane. Available in 4 drum...
- Model: UDR-574
Top Mount Fork Truck Mounted (and Crane slung) Drum Rotator. Rotation Types: loop chain, crank handle or hydraulics - 360kg
Product Images
Crane Slung Drum Rotators are designed for controlled manual rotation of 210 litre drums, the attachment is slung under a crane, small fork pockets are fitted for use with a forklift truck. The gearbox allows controlled pouring and rotation through a full...
- Model: DR-571
Camlok DBV Crane Slung Scissor Action Drum Grab For Steel Drums 400-600mm Diameter - 300kg
Product Images
The DBV Grab is designed to lift and transport steel or plastic drums in the vertical position. The “V” shaped jaws are lined with hard wearing rubber ribbed pads, thus ensuring the drum is gripped firmly when being lifted. The jaws support pivot and remain vertical when lifting....
- Model: Camlok DBV
Camlok DCV500 Crane Slung "Side Mounted" Drum Grab - 500kg
Product Images
The Camlok DCV500 clamp is designed to lift mild steel drums in the vertical position. A single clamp can be used to lift a drum with or without a lid. The clamp automatically grips the rim of the drum when the hook ring is lifted.
- Model: Camlok DCV500
Heavy Duty Fork Mounted (and Crane slung) Drum Rotator. Rotation by Loop Chain or Crank Handle - 1000kg
Product Images
This is a heavy duty steel girdle fitted with two over centre clamps ensuring the drums are gripped firmly at all times. A heavy duty version of the crane-slung drum rotator, designed purposely for handling 210 litre steel drums, containing heavy products such as powder, scrap,...
- Model: HDDR-573
Fork Mounted (and Hook Suspended) Drum Rotator for Dispensing Liquid With Control. Rotation by Loop Chain or Crank Handle - 200kg
Product Images
The gearbox allows a full 360 degrees rotation and precision controlled pouring. The drum is fixed to the attachment by a single webbing harness and ratchet. Designed for manually controlled rotation for the 110 litre steel drums. Slides simply onto...
- Model: DR-570
Overhead Crane Hook Suspended "Fully Automatic" Drum Tongs Lifter - 360kg or 1000kg
Product Images
This is designed for handling 210 litre drums of the steel tight head, open topped, L Ring plastic or Mauser varieties. Operation is fully automatic allowing the truck operator to complete the whole operation without leaving his seat. This may be fitted under a fork mounted hook, fork or carriage...
- Model: FADT-553
Fork Lift Truck (and Overhead Crane Slung) Capstan Operated Crane Slung Drum Rotator - 250kg
Product Images
This is a simple and effective way to turn over a 210 litre steel drum allowing the contents to be emptied. Operated by a detachable handle, Designed with the sole purpose to handle full drums only.
- Model: CDR-575
Fork Truck Mounted (and Crane Mounted) "Semi Automatic" Drum Lifting Device - 500kg or 1000kg
Product Images
This may be fitted under a fork mounted hook, fork or carriage mounted jib, or under an overhead or lorry mounted crane. This is semi automatic in operation. This drum lifter is used for picking up 210 litre drums of the tight-head or open topped steel varieties. Simple but effective...
- Model: SADT-552
Overhead Crane Mounted Automatic Drum Lifter for Lifting Steel or Plastic L Ring Drums from 550mm to 620mm Diameter. - 500kg Capacity
Product Images
This can either be used under slung from a forklift or overhead from a crane hoist.
- Model: DTG-AU-SG-1
Universal Fork truck Mounted (and crane slung) Drum Rotator. Rotation by Crank Handle or by Loop Chain - 360kg
Product Images
This is the perfect solution for the rotation of drums where the drums you are using are of mixed variety. Designed to handle any type of drum including fibre, plastic or steel, in 110 or 210 litre sizes. Can be used on a fork truck or overhead crane. Available in 4 drum...
- Model: UDR-574
Top Mount Fork Truck Mounted (and Crane slung) Drum Rotator. Rotation Types: loop chain, crank handle or hydraulics - 360kg
Product Images
Crane Slung Drum Rotators are designed for controlled manual rotation of 210 litre drums, the attachment is slung under a crane, small fork pockets are fitted for use with a forklift truck. The gearbox allows controlled pouring and rotation through a full...
- Model: DR-571
Overhead Crane Hook Suspended "Fully Automatic" Drum Tongs Lifter - 360kg or 1000kg
Product Images
This is designed for handling 210 litre drums of the steel tight head, open topped, L Ring plastic or Mauser varieties. Operation is fully automatic allowing the truck operator to complete the whole operation without leaving his seat. This may be fitted under a fork mounted hook, fork or carriage...
- Model: FADT-553
Universal Fork truck Mounted (and crane slung) Drum Rotator. Rotation by Crank Handle or by Loop Chain - 360kg
Product Images
This is the perfect solution for the rotation of drums where the drums you are using are of mixed variety. Designed to handle any type of drum including fibre, plastic or steel, in 110 or 210 litre sizes. Can be used on a fork truck or overhead crane. Available in 4 drum...
- Model: UDR-574
Fork Truck Mounted (and Crane Mounted) "Semi Automatic" Drum Lifting Device - 500kg or 1000kg
Product Images
This may be fitted under a fork mounted hook, fork or carriage mounted jib, or under an overhead or lorry mounted crane. This is semi automatic in operation. This drum lifter is used for picking up 210 litre drums of the tight-head or open topped steel varieties. Simple but effective...
- Model: SADT-552
Universal Fork truck Mounted (and crane slung) Drum Rotator. Rotation by Crank Handle or by Loop Chain - 360kg
Product Images
This is the perfect solution for the rotation of drums where the drums you are using are of mixed variety. Designed to handle any type of drum including fibre, plastic or steel, in 110 or 210 litre sizes. Can be used on a fork truck or overhead crane. Available in 4 drum...
- Model: UDR-574
Overhead Crane Hook Suspended "Fully Automatic" Drum Tongs Lifter - 360kg or 1000kg
Product Images
This is designed for handling 210 litre drums of the steel tight head, open topped, L Ring plastic or Mauser varieties. Operation is fully automatic allowing the truck operator to complete the whole operation without leaving his seat. This may be fitted under a fork mounted hook, fork or carriage...
- Model: FADT-553
