Groundwork / Construction Lifting Clamps
A comprehensive range of constuction Clamps from a few quality manufacturers including the likes of Crosby, Camlok and Tractel.
Groundwork and construction clamps are one of our most active clam sections / categories in our lifting clams catalogue and are manufactured by Camlok, Tractel, Crosby IP Clamps and Riley Superclamps – all top quality manufacturers. Amongst the items sold online are pile clamps, pipe hooks, coil lifting clamps, block grabs and brick grabs. Weather our customers need a clamp to lift a kerb stone or a concrete manhole section we have a clam to lift it. Thank you for taking a look at our construction industry clamps, we look forward to receiving your enquiry.
Camlok CP Pile Pitching Clamp - Range from 2000kg to 5000kg
Product Images
The Camlok CP is designed specifically for pitching sheet steel piling, it is NOT designed to extract a driven pile. A rope is fitted for easy release from the ground.
- Model: Camlok CP
Camlok PH Pipe Hooks - Range from 2000kg to 10,000kg
Product Images
Camlok PH Series Pipe Hooks are used in pairs to handle pipe / tubes etc. Available with 2 legged chain slings and / or polyurethane coated Type A, 60 to 90 degrees Type B, 90 to 120 degrees. They are manufactured from special high tensile steel
SWL (safe working load) options available: 2 tonnes, 4 tonnes, 6 tonnes, 8...
- Model: Camlok PH
Camlok BTR Pipe Grabs - 2500kg or 3500kg
Product Images
Camlock pipe grabs are designed to handle concrete tubes, pipes and rolls etc. the jaws can be fitted with plastic or rubber lined pads. They are fitted with an automatic open / close device. Minimizes trench width allowing fast installation of load.
- Model: Camlok BTR
Camlok BRL Spring Balanced C-Hook - Range 1000kg to 3000kg
Product Images
The BRL C-Hook can be modified to suit a wide range of applications. Please contact our sales team for more information.
It is designed for lifting and handling of pipe sections in the horizontal position. Fitted with spring balance, adjustable end stop and chain. The end stop ensures correct positioning of...
- Model: Camlok BRL
Camlok BTG Concrete Pipe Clamps - Range 1500kg or 3000kg
Product Images
The Camlok BTG clamp is designed to vertically lift and position concrete manhole pipes. The clamps can be adjusted to different wall thicknesses using the adjusting pin and the holes inside the clamping arms. The BTG concrete pipe clamp is designed to vertically lift and position concrete manhole pipes. The clamps can be...
- Model: Camlok BTG
Camlok PP Pile Pulling Clamp - Range from 3000kg to 12000kg
Product Images
The Camlok PP is designed to pull out driven piles and/or trench shielding; it is recommended that it is used with a load indicator or load cell. A narrow opening and deep slot ensures a firm grip. This comes as standard with a double locking mechanism. Designed to pull out driven piles and/or trench shielding.
- Model: Camlok PP
Camlok TBG Scissor Block Grab - Range from 200kg to 5000kg
Product Images
These grabs operate in a scissor action and have swivelling jaws to allow parallel lifting. They are designed to handle objects with square parallel edges such as stone/concrete blocks. They have the option of manual or automatic latching.
Grab Features: Rubber pads will only restrict the material from slipping if...
- Model: Camlok TBG
Camlok TDI Coil Grabs - Range from 100kg to 1000kg
Product Images
Available in three versions for handling, cylindrical and rectangular hollow loads and a range of optional jaw linings.
- Model: Camlok TDI
Camlok TSA Single Arm Block Grab - 250kg or 500kg
Product Images
This grab is fitted with a lock to secure the spring-loaded arm. The large handle makes it easy to carry by hand. It can be designed for any working load limit and with jaw width capacity to suit customer requirements. It is fitted with plastic pads for efficient grip and to prevent damage to the load. Designed for picking up...
- Model: Camlok TSA
Camlock TST Block Grab - Range from 200kg to 1000kg
Product Images
Available options for small blocks or large block lifting. The grabs operate in a scissor action and are designed to handle objects with square parallel edges. It also has swivelling jaws to allow parallel lifting.
- Model: Camlok TST
Camlok TRU Round Stock Grabs - Range from 100kg to 4000kg
Product Images
The TRU round stock scissor grab is designed to lift and handle material such as tubes, pipes, rolls of plastic and roofing felt. The jaws can be fitted with plastic or rubber lined pads to minimise marking of sensitive surface materials; the lining also helps prevent items slipping if the grab has not been positioned...
- Model: Camlok TRU
Tractel TOPAL ZAC Clamp for Lifting Revolving Loads with Parallel Sides - 1500kg
Product Images
The Tractel ZAC clamp enables lifting and manual turning without marring of various products with parallel sides.
Jaws are articulated and enable the manual rotation of the load. This clamp is fitted with a semi-automatic system which allows the laying down of the load without human...
- Model: TTZ-3326
Tractel TOPAL RB Manhole Hook for Use in Pairs or Sets of Three - Range from 500kg to 1500kg
Product Images
The Tractel TOPAL Manhole Hooks are used for lifting vertical wells of round, square or rectangular concrete. The hooks have a grooved surface that ensures perfect grip on the materials in case of shock whilst moving the load.
Their use does not require any adjustment and the...
- Model: TTR-3314
Tractel TOPAL RT Round Bar and Pipe Clamps - Range from 500kg to 3000kg
Product Images
The Tractel TOPAL RT is used for the lifting of rods, tubes, profiles and various small squares in circles or bundles. Once it's locked in the open position this allows you to deposit the load without any action on the caliper. These accessories are fitted with an open position locking system allowing to lay...
- Model: Tractel TOPAL RT
Tractel SCX/CX TOPAL Lifting Beams for Cone-shapped Concrete Manhole - 1000kg
Product Images
The CX ensures contact at two points of loading. The SCX is more robust for intensive use and ensures 3 point loading. These accessories are fitted with polyurethane coated pads which enable the handling of cone shaped manholes without marking. Delivery includes a chain sling (CX1 model).
- Model: TTS-3316
Tractel TOPAL TB Pipe Hooks for use in Pairs - Range from 500kg to 1500kg
Product Images
The Tractel TOPAL TB are hooks for use in pairs to lift pipes with a large opening, fitted with long handles for easy handling. Working in pairs with a 2-arm sling the load is lifted in a horizontal position.
- Model: TTT-3317
Tractel TOPAL TI Clamp for Horizontal Lifting and/or Laying in Trenches of Pipes- Range 500kg to 1000kg
Product Images
This is an accessory to transport horizontal pipes and lay them into trenches. Also designed to transport bars and tubes of any material.
S = semi-automatic laying down - Semi-automatic model: manual grab action and automatic locking of the grab in the open...
- Model: Tractel TOPAL TI
Tractel TOPAL F Pipe Hooks - Range 1000kg to 7500kg
Product Images
The Tractel TOPAL F is a handling hook designed to horizontally lift cast iron or steel pipes. These hooks are specifically designed to be used in pairs with a wire rope, chain or strap 2 legged sling.
Tractel TOPAL F pipe hooks are available in the following sizes:1000kg/opening 0 - 60mm, 2500kg/opening 0 -...
- Model: Tractel TOPAL F
Tractel BX Kerbstones Clamps - Range 100kg to 120kg
Product Images
The Tractel BX is an handling accessory to transport and lay concrete kerbstones manually or using a 2 legged sling. A model with handlebars is available to ensure better stability when manually transporting kerbstones.
Tractel Kerbstone clamps are available in the following sizes - 120kg/opening 1000mm, 100kg/opening...
- Model: TB-3293
Tractel TOPAL PB Clamp for Lifting Loads with Parallel Sides - 500kg or 1000kg
Product Images
This grab can be used for vertical lifting, without marking, all products with parallel sides made of various materials: concrete, steel, plastic, wood, marble, etc. These accessories are fitted with an automatic lower lock which allows the load to lay down without any manual intervention. Rubber...
- Model: Tractel TOPAL PB
Riley Superclamps PH Pipe Hooks with Incorporating Lifting Shackle - Range from 1000kg to 8000kg
Product Images
Prices are for a pair of hooks
- Model: PH-3351
Riley Superclamps P Adjustable Pipe and Round Section Lifting Clamps - Range from 1000kg to 4000kg
Product Images
Riley pipe lifting clamps are designed for efficient and easy handling of cylindrical objects such as pipes or bars.
This clamp is readily applied to cylindrical objects, and the adjustable jaw grip allows for a wide range of cylindrical diameters of sections to be lifted....
- Model: APAR-3362
Crosby IPCC Vertical Lifting Clamp for Lifting Concrete Pipe Sections - 500kg
Product Images
The IPCC vertical lifting clamp is designed for the lifting and transfer of concrete pipe sections and wells. It is to be exclusively used per pair or per three clamps. This has a very easy application and removal of the clamp thanks to the built in carrying grips.
Higher WLL and different...
- Model: Crosby IPCC
Mechanical Scissor Grabs For Crane or Fork Truck - Range from 100kg to 1500kg
Product Images
We offer a wide range of mechanical action scissor grabs, designed to lift a variety of loads including bricks, blocks, kerbs and slabs.These grabs are purely mechanical and require no hydraulic or electrical services. They can be used with lorry cranes, tower cranes and forklift trucks (using...
- Model: MSG-638
