Crosby Vertical Plate clamps for Lifting Sheet Steel Carried Upright

Universal vertical lifting clamp IPU10 is suitable for the lifting, turning (180°) and vertical transfer of steel plates and constructions. The IPU10 lifting clamp is fitted with locking devices for both open and closed positions, which ensures complete reliability. It is fitted with a hinged hoisting eye moving in all directions so as to enable the user to place and lift the load from any direction. The IPU10 lifting clamps with WLL of 12 Tonnes and up are fitted with special hook-up facilities to enable easy placement in a horizontal position. Higher WLL and different jaw-apertures upon request. The minimum working load must be at least 10% of the rated WLL.

Universal vertical lifting clamp IP10 is suitable for the lifting, turning (180º) and vertical transfer of steel plates and contsructions. The IP10 lifting clamp is fitted with locking devices for both open and closed positions, which ensures complete reliability. The IP10 lifting clamps with WLL of 12 Tonnes and up are fitted with special hook-up facilities to enable easy placement of the clamp in a horizontal position. Higher WLL and different jaw-apertures upon request. The minimum working load must be at least 10% of the rated WLL.

IP10/S and IPU10/s vertical lifting clamps are suitable for the lifting, turning (180°) and vertical transfer of stainless steel plates, beams and sections. These lifting clamps are fitted with a camsegment and a pivot made of stainless steel so as to avoid contact corrosion.

All capacities are available with a Universal hoisting eye or a fixed hoisting eye.

IP10/H and IPU10/H vertical lifting clamps are suitable for the lifting, turning (180°) and vertical transfer of steel plates and sections with extra hard surface hardness.
These Lifting Clamps are suitable for the lifting of materials with a surface hardness up to max. 47 Rc (450HB).
These lifting clamps are fitted with a camsegment and a pivot made of extra hard wear-resistant material.

All capacities are available with a Universal hoisting eye or a fixed hoisting eye.

The IPU 10/A automatically locks on to the material as soon as the clamp is placed on the plate. The safety lock remains in position as the clamp closes to prevent hazardous situations. The IPU10/A clamp can be fastened in places that are difficult to reach. The minimum working load must be at least 10% of the rated WLL.

IPTPU Lifting Clamps are used to lift up very thin, large steel plates from the horizontal to the vertical position and turn them. The specifc design of this model prevents the plates from 'buckling' while being lifted. Depending on the size of the plate as well as other factors, you may select either the standard IPTPU version or the special IPTPUX model, which is equipped with lateral supporting profiles. The minimum working load must be at least 10% of the rated WLL.

Vertical lifting clamp IPV(U)Z is specially designed for the transfer of small profiles. The IPV(U)Z lifting clamp is fitted with a locking device for both open and closed positions, which ensures complete safety.

All capacities are available with a Universal hoisting eye or a fixed hoisting eye.

 

The IPNM lifting clamps can be used in almost all sectors of industry where during lifting or transfer no damage to the material is permitted. The jaws of the lifting clamp are made of a synthetic material with a very high coefficient of friction so that damageable plates can be held firmly, and transferred in either a vertical or horizontal position. This also applies for materials with a very smooth surface, composites and coated plates or plates with a very hard (impenetrable) surface