Crosby Swivel Lifting Hooks

Crosby S322 Swivel hooks are forged, quenched and tempered and load rating codes stamped on each hook. 322 Swivel Hooks use the same load rating code as 319 Shank Hooks. There are many features though proper design, careful forging, and precision controlled quench and tempering gives maximum strength without excessive weight and bulk

Careful forging, and precision controlled quench and tempering gives maximum strength without excessive weight and bulk. Crosby S3322's have a low profile hook tip designed to utilize Crosby S-4320 or PL-N latch kit. Even years after purchase of the original hook, latch assemblies can be added.

Crosby S326A Shur-Lok swivel hooks are forged alloy steel, quenched and tempered, and individually proof tested at 2-1/2 times the Working Load Limit with certification. The positive lock latch is self-locking when the hook is loaded. It is rated for both wire rope and grade 8 chain. The S-3326 Swivel hook utilizes anti-friction bearing design which allows the hook to rotate freely under load. Fatigue rated. The SHUR-LOC hook, if properly installed and locked, can be used for personnel lifting applications.

Crosby BLC & BLA Closed Swivel Bail Golden Gate Hoist Hooks are for use where hoisting line or shackle can be inserted into the bail. They are suitable for infrequent, non-continuous rotation under load.  Use in corrosive environment requires shank and nut inspection in accordance with ASME.

BL-C - with self-closing gate.
BL-A - with manual-closing gate. 

 

The Crosby Open Swivel Bail hoist hook is for attachment to a link chain.They are suitable for infrequent, non-continuous rotation under load. Use in a corrosive environment requires shank and nut inspection in accordance with ASME B30.10-1.2.1(b)(2)(c)2000.   

BL-E - with Self-Closing Gate.
BL-G - with Manual-Closing Gate

The Crosby S3316 Replacement Hoisting Hooks easily attaches to any chain and electric hoist with welded link load chain, roller chain or wire rope with suitable end fitting.  They have a forged swivel and are suitable for infrequent, non-continuous rotation under load. Use in corrosive environment requires shank and nut inspection in accordance with ASME B30.10-1.2.1(b)(2)(c)2000.

Crosby S3319 Utility Swivel Hoist Hook is made from forged alloy steel, quenched and tempered. It can be proof tested to 2 times the Working Load Limit and is designed for utility applications using synthetic rope. Suitable for infrequent, non-continuous rotation under load.

Crosby S3326 SHUR-LOC Swivel Hooks with bearing are forged alloy steel, quenched and tempered and are individually proof tested at 2-1/2 times the Working Load Limit with certification. Positive lock latch is self-locking when hook is loaded. Rated for both wire rope and grade 8 chains. Trigger repair kit available (S-4316). Consists of spring, roll pin, and trigger. S-3326 swivel hook utilizes anti-friction bearing design which allows hook to rotate freely under load. Fatigue rated.