Crosby Horizontal Plate clamps for Lifting Steel Sheets Carried Flat

The IPHNM-lifting clamps (NM stands for non-marring) can be used in almost all sectors of industry where during lifting or transfer no damage to the material is permitted. The jaws of the lifting clamp are made of a synthetic material with a very high coefficient of friction so that damageable plates can be held firmly and transferred in either a vertical or horizontal position. This also applies for materials with a very smooth surface, composites and coated plates or plates with a very hard (impenetrable) surface.

The IPHTONZ and IPHSZ horizontal lifting clamps are suitable for the lifting and transfer in horizontal position of non-sagging steel plates. The IPHTONZ/IPHSZ lifting clamps may also be used whilst hanging vertically under a spreader beam. The IPHSZ is equal to the IPHTONZ but with a higher jaw aperture.
Higher WLL and different jaw apertures upon request.

Horizontal lifting clamp IPHOZ is suitable for the lifting and transfer of sagging or bending plates in horizontal position. It has a very light-weight construction. The maximum top-angle is 60º. The IPHOZ lifting clamps can also be applied in combination with long chains or two leg slings.

Higher WLL and different jaw-apertures upon request.

Horizontal lifting clamp IPBC is suitable for the lifting and transfer of steel beams and plates and for sagging plates. Fitted with a pretension device on the material, causing the clamp to remain on the plate after it is placed, even in unloaded position. The IPBC lifting clamps may only be used up to a top angle of maximum 60º. The clamps may be used both individually or in pairs.
Higher WLL and different jaw apertures upon request.

The Horizontal lifting clamp IPHGZ is suitable for the lifting and transfer of steel plates (including sagging plates). It is fitted with a locking device for both open and closed positions, which ensures complete reliability. These clamps are also suitable for working in conjunction with an angle bench, guillotine, round roller, etc.
Clamp Available in two versions: IPHGZ: fitted with a fixed hoisting eye, IPHGUZ: fitted with a swivel hoisting eye.
Higher WLL and different jaw-apertures upon request.

Horizontal lifting clamp IPPE is suitable for the lifting and transfer of bundles of non-sagging steel plates in horizontal position and the jaw-aperture can be easily adjusted. Raising the handle opens the clamp and facilitates easy and quick placing or removing. Higher WLL and different jaw-apertures upon request.
Please Note: WLL and Weight per pair, priced per piece.