Crosby Eye Lifting hooks

Quick Ref: CN-1883
Crosby Eye Lifting hooks

Crosby Eye Hoist Hooks. Available as either Carbon self-colour, Carbon Galvanised or Alloy.

Crosby 320 Eye Hoist Hooks from 750kg to 60 tonnes SWL are available in carbon steel and alloy steel. They have a 5:1 Design Factor and are load rated. Proper design, careful forging and precision controlled quenched and tempering give maximum strength without excessive weight and bulk. Every Crosby Eye Hook has a pre-drilled cam which can be equipped with a latch.

Crosby SHUR-LOC S1316 Eye Hooks. The Crosby SHUR-LOC S1316 Eye Hooks from 1450kg to 27.1 tonnes are forged Alloy Steel, Quenched and Tempered. Lock Latch is self-locking when hook is loaded. The SHUR-LOC hook, if properly installed and locked, can be used for personnel lifting applications. They are individually proof tested to 2-1/2 times the Work Load Limit with certification and are fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles. Suitable for use with Grade 100 and Grade 80 chain.
Crosby Forged Alloy Steel, Quenched and Tempered Snap Hooks.

Crosby G3315 Snap Hooks are forged alloy steel and are quenched and tempered. These hooks have pressed steel latches and stainless steel springs, bolts and nuts. For replacement latch kit, order Stock No. 9900299.

Crosby S377 Barrel Hoist Hooks.

Crosby S377 Barrel Hoist Hooks are forged carbon steel and are quenched and tempered. The S377 meets the performance requirements of Federal Specification RR-C-271D, Type V, Class 6, except for those provisions required of the contractor. 

Available in the following sizes: 1t per pair.

Crosby A378 Sorting Hook for hoisting optional with handle or with no handle. All of the Crosby A378 Sorting Hook for hoisting are forged alloy steel and as standard they are all quenched and tempered; the deep straight throat permits efficient handling of flat plates or large cylindrical shapes.
Crosby 1210 Round Reverse Eye Hoisting Hooks.

All Crosby 1210 Round Reverse Eye Hoisting Hooks are made from forged carbon steel - galvanized.


Subsea Flourescent Eye Hooks. The range of Crosby ROV Sub-sea Fluorescent Eye Hooks are designed specifically for use in offshore installations and marine applications. They have the hook identification code stamped on each hook, all quenched and tempered and are fitted with the Crosby QUIC-CHECK® angle indicators forged into the top eye and deformation and angle indicators forged on the hook. They also have a fluorescent yellow finish for high "sub-sea" visibility.

Crosby L562A ROV shank hook with a long hexagonal body for easy of manipulation by ROV devices. The Crosby L562A ROV shank hooks have a hook identification code stamped on each hook. They are quenched and tempered with QUIC-CHECK® angle indicators forged into the top eye and deformation and angle indicators forged on hook. Coloured fluorescent yellow for high visibility subsea they also possess a high cycle, long life spring. Pad eyes are provided on either side of hook as cable guides.

 

Crosby grade 80 alloy eye sling hook to suit chain sizes from 7mm to 22mm. Crosby grade 80 (8) eye sling hooks are available with extra latch kits, the hooks are available to suit 6 different grade 8 chain sizes, these are 7mm, 10mm, 13mm, 16mm, 19mm and 22mm. The capacities of these hook range from 1590kg up to 15510kg which makes the A327  an ideal lifting hook for a variety of lifting applications.
Features:  Alloy steel - quenched and tempered, individually proof tested at 2-1/2 times the Working Load Limit with certification,  S-4088 Latch Kit fits hooks.
Crosby Eye Hoist Hooks. Forged Alloy Steel - Quenched and Tempered. Suitable for use with Grade 80 chain in overhead lifting applications as long as hook is Proof Tested as part of the chain sling assembly or as an individual component. Per ANSI B30.9-1. Each hook has a Product Identification Code (PIC) for material traceability, along with the size and Crosby & U.S.A. in raised letters. Meets ASTM A-952-96 and proposed Euronorm standards for Grade 80 chain fittings.
Crosby Eye Chain Hook with Integrated Latch.

This Eye Chain Hook is Forged Alloy Steel - Quenched and Tempered. All these hooks are Individually Proof Tested at 2-1/2 times the Working Load Limit with certification. We recommend grinding the WLL (which is 5:1 Design Factor) off the hook when using with Grade 80 chain.
Features: Integrated heavy duty latch, large throat opening, anti-fouling due to carefully designed contours.

Crosby A328 Quenched and Tempered Alloy Steel Eye Grab Hook. Crosby A328 Quenched and Tempered Alloy Steel Eye Grab Hook is made from Alloy Steel - quenched and tempered. Individually Proof Tested at 2-1/2 times the Working Load Limit with certification. The use of A-328 Eye Grab Hook will result in a 20% reduction in chain capacity. When used to hook back to chain leg to form a choker, the angle of the choke must be 120 degrees or greater.
Crosby grade 80 eye foundry hooks to suit 7mm and 22mm lifting chains. Alloy Steel - Quenched and Tempered.
Individually Proof Tested at 2-1/2 times the Working Load Limit with certification.
Crosby Bullard Alloy Grab Hook with Latch.

Crosby S320AN available in the following size - 1600kg.

Chain size - 7mm.

Crosby forged steel eye grab hooks to suit 7 to 19mm chain. Crosby H/A 323 Eye Grab Hook features: Forged Steel - Quenched and Tempered. Design Factor is 4:1. H-323 designed for Crosby Spectrum 4® chain. A-323 designed for Crosby Spectrum 7® chain.
Crosby Eye Hoist Hook. Forged Alloy Steel - Quenched and Tempered. Each hook has a Product Identification Code (PIC) for material traceability, along with the size and the name Crosby & U.S.A. in raised letters. Due to the hook being made from grade 10 alloy steel these particular hooks are 25% stronger than Grade 80 steel hook and features an engineered flat for use with S-1325A coupler link.

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Top