Camlok Beam clamps. RSJ Girder Lifting and Suspension Clamps.

Fitted with swivelling jaws that provide a positive grip on the bottom flange of rolled steel joists. Jaw automatically rotates into the horizontal position ensuring the full width of the jaw is in contact with the flanges.

The clamp can be quickly and easily attached to both beams via the screw mechanism. The SCT twin clamps can be supplied fixed at parallel, at 90º to each other or with a swivel mechanism that allows 360º rotation. Used for supporting vertical loads only. Enables one beam to be suspended beneath another.

This Fixed/Swivel beam clamp has a Wide Flange Range
Options available: 3000kg=range 100-270 mm, 5000kg=range 75-305 mm

The Camlok SCH clamp can be used for lifting Hollow Sections or SQ Section Profiles or for attaching to Hollow Steel or SQ Section Steel work.  Clamps can be designed up to 10 tons WLL and to suit most sizes of roller steel sections.

The SCA screwlok beam clamps offer many of the same features as other camlok beam clamps however this range is specifically designed to be attached to rolled steel angle beams. These are normally found against the wall of a roof.

N.B. This model must not be used for lifting for risk of side loading.